Blog Home

DIWire printer – Draw, click, bend!

Priya KuberMay 7th, 2012

So, you want a DIY printer, but you have no idea to print the intricate squiggly design on the board? Enter Pensa!

In the maker’s own words:

But there are times when we need to output lines in space rather than volumes. Most 3D printing technologies are not well suited for printing thin lines because the materials are weak, the machine uses a lot of 3D-print support material, and the process is slow. The closest thing to a machine that can output lines is a CNC wire bender, but these machines are used almost exclusively for mass production in factories. They are not used for rapid prototyping because the equipment is large, expensive and takes trained personnel to run. So, we decided to make the DIWire Bender.

Apart from a mere prototype, the machine can read any data. A few desired applications can be : artwork from a random number algorithm, or internet data like stock prices and weather stats. You can also create mass customized products, like eyeglass frames that fit, or be a street vendor printing jewelry from a person’s silhouette, on demand.

And it doesn’t have to be aluminum wire; in principal the machine could bend other materials, including colored electrical wires, some plastics, memory metals, even light pipes to create small light forms. And if you don’t like the output, it could be configured to pass the bent wire through the straightener to start again.

Have fun!

Via:[Pensanyc]

Categories:Ar(t)duinoCNC