Blog Home

Paperduino Pi

davide.velluto — December 27th, 2012

This is a project for people a little bit skilled in soldering and design PCB. The user [dernulleffekt] designed an homemade shield for Raspberry Pi that integrate an Arduino Board.

The Paper-Duino-Pi is an Arduino shield for the Raspberry Pi. Due to the fact that it is designed as Paper-PCB it is easy to create and one doesn’t need a printed circuit board. Some small modificaten in the OS and IDE and you have a perfect interface for the Raspberry Pi.

This shows how one can use it with the Firmata and Pure Data. On the [website] there is a very well written tutorial to build your Raspberry/Arduino shield at home.

Categories:Gallery

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

2 Responses to “Paperduino Pi”

  1. David Wang Says:
    January 2nd, 2013 at 12:15:48

    Hello Mr Davide.Velluto,very glad to know your paperarduino pi.May I know if compatible cables can be purchased?

    Thank you
    David

  2. Paperduino Pi | PROTO Says:
    January 6th, 2013 at 16:47:52

    […] Från http://arduino.cc/blog/2012/12/27/paper-duino-pi/ […]

Leave a Reply

You must be logged in with your Arduino account to post a comment.