Main.ArduinoBTInitializationSketch History

Hide minor edits - Show changes to output

April 19, 2013, at 09:49 AM by Alberto Cicchi -
Changed lines 3-4 from:
This sketch is run once on each [[ArduinoBoardBluetooth | Arduino BT]] to initialize the bluetooth module before the board is shipped (you shouldn't need to run this code; it's just here for reference). For details on the commands sent to the module, see the [[http://www.bluegiga.com/default.asp?file=210 | iWrap data sheet]].
to:
This sketch is run once on each [[ArduinoBoardBluetooth | Arduino BT]] to initialize the bluetooth module before the board is shipped (you shouldn't need to run this code; it's just here for reference). For details on the commands sent to the module, see the [[http://www.bluegiga.com/iWRAP_software | iWrap data sheet]].
June 01, 2008, at 11:20 AM by Camille Moussette - fix typo for printString
Changed line 29 from:
printString("SET CONTROL BAUD 115200,8n1"); //first release 19200
to:
Serial.println("SET CONTROL BAUD 115200,8n1"); //first release 19200
January 27, 2007, at 02:46 PM by David A. Mellis -
Changed lines 3-4 from:
This sketch is run once on each [[ArduinoBoardBluetooth | Arduino BT]] to initialize the bluetooth module. For details on the commands sent to the module, see the [[http://www.bluegiga.com/default.asp?file=210 | iWrap data sheet]].
to:
This sketch is run once on each [[ArduinoBoardBluetooth | Arduino BT]] to initialize the bluetooth module before the board is shipped (you shouldn't need to run this code; it's just here for reference). For details on the commands sent to the module, see the [[http://www.bluegiga.com/default.asp?file=210 | iWrap data sheet]].
January 27, 2007, at 02:45 PM by David A. Mellis -
Added lines 1-39:
!!Arduino BT Initialization Sketch

This sketch is run once on each [[ArduinoBoardBluetooth | Arduino BT]] to initialize the bluetooth module. For details on the commands sent to the module, see the [[http://www.bluegiga.com/default.asp?file=210 | iWrap data sheet]].

[@
/* BT test 01
* ------------------
* Massimo Banzi
*
*/

int LED = 13; // select the pin for the LED
int RESET = 7;

void setup() {
pinMode(LED,OUTPUT); // declare the LED's pin as output
pinMode(RESET,OUTPUT); // declare the LED's pin as output
Serial.begin(115200); // connect to the serial port
digitalWrite(RESET, HIGH);
delay(10);
digitalWrite(RESET, LOW);
delay(2000);
Serial.println("SET BT PAGEMODE 3 2000 1");
Serial.println("SET BT NAME ARDUINOBT");
Serial.println("SET BT ROLE 0 f 7d00");
Serial.println("SET CONTROL ECHO 0");
Serial.println("SET BT AUTH * 12345");
Serial.println("SET CONTROL ESCAPE - 00 1");
printString("SET CONTROL BAUD 115200,8n1"); //first release 19200
}

void loop () {
digitalWrite(LED, HIGH);
delay(100);
digitalWrite(LED, LOW);
Serial.println("ciao");
delay(1000);
}
@]

Share