Main.MiniUSB History

Hide minor edits - Show changes to output

November 23, 2012, at 06:10 PM by Roberto Guido - added comments box on bottom
Added lines 27-28:

(:div id='commentsbox':)
October 03, 2011, at 03:00 PM by Federico -
Changed line 7 from:
(:cell:)[[http://arduino.cc/en/Main/Buy | Attach:buttonDistributors.jpg]]
to:
(:cell:)[[http://arduino.cc/en/Main/Buy | Attach:buttonDistributors.jpg ]]
September 24, 2011, at 12:31 AM by Davide Gomba -
Changed lines 1-2 from:
!!Mini USB Adapter (retired)
to:
!!Mini USB Adapter
Added lines 6-9:
(:table border = 0 :)
(:cell:)[[http://arduino.cc/en/Main/Buy | Attach:buttonDistributors.jpg]]
(:tableend:)
September 24, 2011, at 12:28 AM by Davide Gomba -
Changed lines 1-2 from:
!!Mini USB Adapter
to:
!!Mini USB Adapter (retired)
Deleted lines 5-9:
(:table border = 0 :)
(:cell:) [[http://store.arduino.cc/eu/index.php?main_page=product_info&cPath=11_15&products_id=86 | Attach:buttonStore.jpg]]
(:cell:)[[http://arduino.cc/en/Main/Buy | Attach:buttonDistributors.jpg]]
(:tableend:)
September 17, 2011, at 02:07 PM by Scott Fitzgerald - mirror dev
Changed lines 1-4 from:
!!!Mini USB Adapter

This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI ([[http://www.ftdichip.com/Drivers/VCP.htm | drivers]] are included with the Arduino software).
to:
!!Mini USB Adapter
Deleted line 3:
Added lines 6-14:
(:table border = 0 :)
(:cell:) [[http://store.arduino.cc/eu/index.php?main_page=product_info&cPath=11_15&products_id=86 | Attach:buttonStore.jpg]]
(:cell:)[[http://arduino.cc/en/Main/Buy | Attach:buttonDistributors.jpg]]
(:tableend:)

!!!Overview

This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI ([[http://www.ftdichip.com/Drivers/VCP.htm | drivers]] are included with the Arduino software).
Changed line 27 from:
See the [[Guide/ArduinoMini | guide to the Arduino Mini]] for information on connecting the adapter to the Mini.
to:
See the [[Guide/ArduinoMini | guide to the Arduino Mini]] for information on connecting the adapter to the Mini.
June 15, 2007, at 11:42 PM by David A. Mellis -
Changed line 21 from:
See this [[ArduinoMiniUSB | diagram]] to connect the Mini USB Adapter and the Arduino Mini.
to:
See the [[Guide/ArduinoMini | guide to the Arduino Mini]] for information on connecting the adapter to the Mini.
February 03, 2007, at 09:51 AM by David A. Mellis -
Added lines 7-8:
''Photo of an original Mini USB Adapter''
Added lines 11-16:
''Pinout of the original Mini USB Adapter''

Attach:mini_usb_pinout_new.png

''Pinout of the revised Mini USB Adapter''
September 25, 2006, at 09:23 AM by David A. Mellis -
Changed line 13 from:
See this [[ArduinoMiniUSB]] to connect the Mini USB Adapter and the Arduino Mini.
to:
See this [[ArduinoMiniUSB | diagram]] to connect the Mini USB Adapter and the Arduino Mini.
September 25, 2006, at 09:23 AM by David A. Mellis -
Changed lines 9-13 from:
Attach:mini_usb_schematic.pdf
to:
Attach:mini_usb_schematic.pdf

!!!!Connecting to the Arduino Mini

See this [[ArduinoMiniUSB]] to connect the Mini USB Adapter and the Arduino Mini.
September 06, 2006, at 10:44 PM by David A. Mellis -
Changed lines 3-4 from:
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.
to:
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. It is based on the FT232RL chip from FTDI ([[http://www.ftdichip.com/Drivers/VCP.htm | drivers]] are included with the Arduino software).
Changed lines 7-9 from:
Attach:mini_usb_pinout.png
to:
Attach:mini_usb_pinout.png

Attach:mini_usb_schematic.pdf
September 06, 2006, at 10:36 PM by David A. Mellis -
Added lines 3-4:
This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.
September 06, 2006, at 10:32 PM by David A. Mellis -
Added lines 3-4:
Attach:mini_usb.jpg
September 05, 2006, at 07:28 PM by David A. Mellis -
Added lines 1-3:
!!!Mini USB Adapter

Attach:mini_usb_pinout.png

Share