Reference.EEPROMRead History

Hide minor edits - Show changes to output

October 26, 2010, at 05:01 PM by David A. Mellis -
Added lines 9-11:
!!!!Syntax
EEPROM.read(address)
October 26, 2010, at 05:00 PM by David A. Mellis -
Changed lines 1-2 from:
!!byte EEPROM.read(address)
to:
[[EEPROM]]

!!read()
Changed lines 11-12 from:
address: the location to read from, from 0 to 511 (''int'')
to:
address: the location to read from, starting from 0 (''int'')
Changed line 49 from:
* [[EEPROMWrite | EEPROM.write]]()
to:
* [[EEPROMWrite | write]]()
February 01, 2009, at 10:48 AM by David A. Mellis -
Changed lines 5-6 from:
Reads a byte from the EEPROM.
to:
Reads a byte from the EEPROM. Locations that have never been written to have the value of 255.
March 04, 2007, at 06:21 PM by David A. Mellis -
Changed lines 9-10 from:
address: which byte to read, from 0 to 511 (''int'')
to:
address: the location to read from, from 0 to 511 (''int'')
March 04, 2007, at 06:13 PM by David A. Mellis -
Changed lines 16-17 from:
[@ #include <EEPROM.h>
to:
[@
#include <EEPROM.h>
March 04, 2007, at 06:12 PM by David A. Mellis -
Changed lines 16-17 from:
[@ @]
to:
[@ #include <EEPROM.h>

int a = 0;
int value;

void setup()
{
Serial.begin(9600);
}

void loop()
{
value = EEPROM.read(a);

Serial.print(a);
Serial.print("\t");
Serial.print(value);
Serial.println();

a = a + 1;

if (a == 512)
a = 0;

delay(500);
}
@]
March 04, 2007, at 06:05 PM by David A. Mellis -
Added lines 1-20:
!!byte EEPROM.read(address)

!!!!Description

Reads a byte from the EEPROM.

!!!!Parameters

address: which byte to read, from 0 to 511 (''int'')

!!!!Returns

the value stored in that location (''byte'')

!!!!Example
[@ @]

!!!!See also

* [[EEPROMWrite | EEPROM.write]]()

Share