Reference.EthernetServer History

Hide minor edits - Show changes to output

November 09, 2011, at 09:09 PM by Scott Fitzgerald -
November 09, 2011, at 09:03 PM by Scott Fitzgerald -
Added line 24:
#include <SPI.h>
November 09, 2011, at 09:02 PM by Scott Fitzgerald -
Changed line 52 from:
Client client = server.available();
to:
EthernetClient client = server.available();
November 01, 2011, at 04:33 PM by Scott Fitzgerald - page creation
Added lines 1-59:
[[Ethernet]] : ''EthernetServer''

!!EthernetServer()

!!!!Description

Create a server that listens for incoming connections on the specified port.

!!!!Syntax

Server(port);

!!!!Parameters

'''port''': the port to listen on (int)

!!!!Returns

None

!!!!Example

(:source lang=arduino tabwidth=4:)
#include <Ethernet.h>

// network configuration. gateway and subnet are optional.

// the media access control (ethernet hardware) address for the shield:
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
//the IP address for the shield:
byte ip[] = { 10, 0, 0, 177 };
// the router's gateway address:
byte gateway[] = { 10, 0, 0, 1 };
// the subnet:
byte subnet[] = { 255, 255, 0, 0 };

// telnet defaults to port 23
EthernetServer server = EthernetServer(23);

void setup()
{
// initialize the ethernet device
Ethernet.begin(mac, ip, gateway, subnet);

// start listening for clients
server.begin();
}

void loop()
{
// if an incoming client connects, there will be bytes available to read:
Client client = server.available();
if (client == true) {
// read bytes from the incoming client and write them back
// to any clients connected to the server:
server.write(client.read());
}
}
(:sourceend:)

Share