Reference.MousePress History

Hide minor edits - Show changes to output

April 27, 2012, at 10:26 PM by Scott Fitzgerald -
Changed lines 30-31 from:

to:
(:source lang=arduino tabwidth=4:)
void setup(){
//The switch that will initiate the Mouse press
pinMode(2,INPUT);
//The switch that will terminate the Mouse press
pinMode(3,INPUT);
//initiate the Mouse library
Mouse.begin();
}

void loop(){
//if the switch attached to pin 2 is closed, press and hold the right mouse button
if(digitalRead(2) == HIGH){
Mouse.press();
}
//if the switch attached to pin 3 is closed, release the right mouse button
if(digitalRead(3) == HIGH){
Mouse.release();
}
}

(:sourceend:)
April 27, 2012, at 10:20 PM by Scott Fitzgerald -
Changed lines 27-28 from:
nothing\\
\\
to:
nothing

!!!!Example


!!!!See also
*[[/Reference/MouseBegin | Mouse.begin]]()
*[[/Reference/MouseClick | Mouse.click]]()
*[[/Reference/MouseEnd | Mouse.end]]()
*[[/Reference/MouseMove | Mouse.move]]()
*[[/Reference/MouseRelease | Mouse.release]]()
*[[/Reference/MouseIsPressed | Mouse.isPressed]]()
March 28, 2012, at 08:33 PM by Scott Fitzgerald -
Added lines 9-10:
Before using Mouse.press(), you need to start communication with [[/Reference/MouseBegin | Mouse.begin]]().
December 07, 2011, at 01:29 AM by Scott Fitzgerald -
Changed lines 25-26 from:
nothing
to:
nothing\\
\\
December 07, 2011, at 01:28 AM by Scott Fitzgerald -
Deleted lines 25-26:

[[Reference.HomePage | Reference Home]]
November 30, 2011, at 05:43 AM by Scott Fitzgerald -
Changed lines 7-8 from:
Sends a button press to a connected computer. Mouse.press() defaults to a left button press.
to:
Sends a button press to a connected computer. A press is the equivalent of clicking and continuously holding the mouse button. A press is cancelled with [[/Reference/MouseRelease | Mouse.release]]().

Mouse.press() defaults to a left button press.
Changed lines 18-23 from:

button: which mouse button to press - ''int''
*Left button : 1 (default, when no argument given)
*Right button : 2
*Middle button : 4
to:
button: which mouse button to press - ''char''
*MOUSE_LEFT (default)
*MOUSE_RIGHT
*MOUSE_MIDDLE
November 30, 2011, at 03:59 AM by Scott Fitzgerald -
Changed lines 7-10 from:
Sends a button press to a connected computer. Mouse.press() defaults to a left buttons press.

WARNING: When you use the Mouse.click() command, the Arduino takes over your mouse! Make sure you have control before you use the command. A pushbutton to toggle the mouse control state is effective.
to:
Sends a button press to a connected computer. Mouse.press() defaults to a left button press.

WARNING: When you use the Mouse.press() command, the Arduino takes over your mouse! Make sure you have control before you use the command. A pushbutton to toggle the mouse control state is effective.
November 30, 2011, at 03:46 AM by Scott Fitzgerald -
Changed lines 12-14 from:
Mouse.press();
mouse.press(button)
to:
Mouse.press();\\
Mouse.press(button)
November 30, 2011, at 03:46 AM by Scott Fitzgerald -
Added lines 1-26:
[[Reference/MouseKeyboard | Mouse]]

!!Mouse.press()

!!!!Description

Sends a button press to a connected computer. Mouse.press() defaults to a left buttons press.

WARNING: When you use the Mouse.click() command, the Arduino takes over your mouse! Make sure you have control before you use the command. A pushbutton to toggle the mouse control state is effective.

!!!!Syntax
Mouse.press();
mouse.press(button)

!!!!Parameters

button: which mouse button to press - ''int''
*Left button : 1 (default, when no argument given)
*Right button : 2
*Middle button : 4

!!!!Returns

nothing

[[Reference.HomePage | Reference Home]]

Share