Loading...

Tutorial-0007.HomePage6 History

Hide minor edits - Show changes to markup

November 18, 2006, at 01:18 PM by David A. Mellis -
Changed lines 40-41 from:

Read a Resistive Sensor? \\

to:

(:cell:) (:cell:)
analog_read_blink? (:cellnr:) Read a Resistive Sensor? \\

Changed lines 45-48 from:
to:

(:cell:) (:cell:)
analog_read_blink? (:cellnr:)

Changed lines 55-56 from:

analog_read_blink?

to:
Restore
November 18, 2006, at 01:17 PM by David A. Mellis -
Changed lines 15-16 from:

(:cell:) \\ digital_write

to:

(:cell:)
digital_write

Changed lines 20-21 from:

(:cell:) \\ digital_write_multiple? digital_write_loop?

to:

(:cell:)
digital_write_multiple? digital_write_loop?

Changed lines 28-29 from:

(:cell:) \\ digital_read_write?

to:

(:cell:)
digital_read_write?

Changed lines 33-34 from:

(:cell:) \\ digital_read_write?

to:

(:cell:)
digital_read_write?

Restore
November 18, 2006, at 01:16 PM by David A. Mellis -
Added lines 15-17:

(:cell:) \\ digital_write (:cellnr:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 19-21 from:

digital_write (:cellnr:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

(:cell:) \\ digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

Deleted lines 22-25:

digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input (:cell:) (:cell:)

Added lines 26-28:

(:cell:) \\ digital_read_write? (:cellnr:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 30-32 from:

digital_read_write? (:cellnr:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

to:

(:cell:) \\ digital_read_write? (:cellnr:) Analog Input

Deleted lines 33-36:

digital_read_write? (:cellnr:) Analog Input (:cell:) (:cell:)

Restore
November 18, 2006, at 01:15 PM by David A. Mellis -
Changed line 12 from:

(:cellnr:) Blinking LED

to:

(:cellnr:) Blinking LED \\

Deleted lines 14-16:

(:cell:) digital_write (:cellnr:) Knight Rider Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 16-17 from:

(:cell:) digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

to:

digital_write (:cellnr:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 21-22 from:

(:cellnr:) Read a Pushbutton The simplest sensor.

to:

digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

Deleted lines 23-25:

(:cell:) digital_read_write? (:cellnr:) Read a Tilt Sensor These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 25-26 from:

(:cell:) digital_read_write? (:cellnr:) Analog Input

to:

(:cellnr:) Read a Pushbutton
The simplest sensor.

Changed lines 29-38 from:

(:cellnr:) Read a Potentiometer

to:

digital_read_write? (:cellnr:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:) Analog Input (:cell:) (:cell:) (:cellnr:) Read a Potentiometer \\

Changed line 41 from:

Read a Resistive Sensor?

to:

Read a Resistive Sensor? \\

Restore
November 18, 2006, at 01:14 PM by David A. Mellis -
Changed lines 5-6 from:

(:table width=80% border=0 cellpadding=5 cellspacing=0:) (:cellnr width=20%:) Circuit and sketch

to:

(:table width=90% border=0 cellpadding=5 cellspacing=0:) (:cellnr width=63%:) Tutorial

Changed line 8 from:

(:cell width=77%:) Tutorial

to:

(:cell width=34%:) Circuit and sketch

Changed lines 12-13 from:

(:cellnr:) digital_write

to:

(:cellnr:) Blinking LED The traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

Changed lines 15-17 from:

(:cell:) Blinking LED
The traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board. (:cellnr:) digital_write_multiple? digital_write_loop?

to:

(:cell:) digital_write (:cellnr:) Knight Rider Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 19-20 from:

(:cell:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

(:cell:) digital_write_multiple? digital_write_loop?

Changed lines 23-24 from:

(:cellnr:) digital_read_write?

to:

(:cellnr:) Read a Pushbutton The simplest sensor.

Changed lines 26-28 from:

(:cell:) Read a Pushbutton
The simplest sensor. (:cellnr:) digital_read_write?

to:

(:cell:) digital_read_write? (:cellnr:) Read a Tilt Sensor These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 30-31 from:

(:cell:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

to:

(:cell:) digital_read_write?

Changed lines 34-37 from:

(:cellnr:) (:cell:) (:cell:) Read a Potentiometer

to:

(:cellnr:) Read a Potentiometer

Restore
November 18, 2006, at 01:13 PM by David A. Mellis -
Changed line 5 from:

(:table width=90% border=0 cellpadding=5 cellspacing=0:)

to:

(:table width=80% border=0 cellpadding=5 cellspacing=0:)

Restore
November 18, 2006, at 01:13 PM by David A. Mellis -
Changed line 6 from:

(:cellnr width=34%:) Circuit and sketch

to:

(:cellnr width=20%:) Circuit and sketch

Changed line 8 from:

(:cell width=63%:) Tutorial

to:

(:cell width=77%:) Tutorial

Restore
November 18, 2006, at 01:13 PM by David A. Mellis -
Changed line 9 from:

(:cellnr:)

to:

(:cellnr:) Digital Output

Deleted lines 10-11:

(:cell:) Digital Output (:cellnr:)

Added lines 12-13:

(:cellnr:) digital_write (:cell:)

Deleted line 15:

digital_write

Changed line 20 from:

(:cellnr:)

to:

(:cellnr:) Digital Input

Deleted lines 21-22:

(:cell:) Digital Input (:cellnr:) digital_read_write?

Added lines 23-24:

(:cellnr:) digital_read_write? (:cell:)

Changed line 31 from:

(:cellnr:)

to:

(:cellnr:) Analog Input

Changed lines 33-34 from:

(:cell:) Analog Input (:cellnr:) Read a Potentiometer

to:

(:cell:) (:cellnr:) (:cell:) (:cell:) Read a Potentiometer

Restore
November 18, 2006, at 01:12 PM by David A. Mellis -
Changed line 6 from:

(:cellnr width=63%:) Tutorial

to:

(:cellnr width=34%:) Circuit and sketch

Changed lines 8-9 from:

(:cell width=34%:) Circuit and sketch (:cellnr:) Digital Output

to:

(:cell width=63%:) Tutorial (:cellnr:)

Added lines 11-12:

(:cell:) Digital Output (:cellnr:)

Changed line 14 from:

(:cellnr:) Blinking LED \\

to:

(:cell:) Blinking LED \\

Added lines 16-17:

digital_write (:cellnr:) digital_write_multiple? digital_write_loop?

Added lines 19-21:

(:cell:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off. (:cellnr:)

Changed lines 23-25 from:

digital_write (:cellnr:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

(:cell:) Digital Input (:cellnr:) digital_read_write?

Added lines 26-28:

(:cell:) Read a Pushbutton
The simplest sensor. (:cellnr:) digital_read_write?

Changed lines 30-31 from:

digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

to:

(:cell:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cellnr:)

Changed lines 34-47 from:

(:cell:) (:cellnr:) Read a Pushbutton
The simplest sensor. (:cell:) (:cell:) digital_read_write? (:cellnr:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:) Analog Input (:cell:) (:cell:)

to:

(:cell:) Analog Input

Restore
November 18, 2006, at 01:09 PM by David A. Mellis -
Deleted lines 14-16:

(:cell:) digital_write (:cellnr:) Knight Rider Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 16-17 from:

(:cell:) digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

to:

digital_write (:cellnr:) Knight Rider
Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 21-22 from:

(:cellnr:) Read a Pushbutton The simplest sensor.

to:

digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

Deleted lines 23-25:

(:cell:) digital_read_write? (:cellnr:) Read a Tilt Sensor These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 25-26 from:

(:cell:) digital_read_write? (:cellnr:) Analog Input

to:

(:cellnr:) Read a Pushbutton
The simplest sensor.

Added lines 29-37:

digital_read_write? (:cellnr:) Read a Tilt Sensor
These use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:) Analog Input (:cell:) (:cell:)

Restore
November 18, 2006, at 01:08 PM by David A. Mellis -
Changed line 12 from:

(:cellnr:) Blinking LED

to:

(:cellnr:) Blinking LED \\

Restore
November 18, 2006, at 01:08 PM by David A. Mellis -
Changed lines 12-13 from:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

to:

(:cellnr:) Blinking LED The traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

Changed lines 16-17 from:

(:cellnr:) Knight Rider: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

(:cellnr:) Knight Rider Connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 23-24 from:

(:cellnr:) Read a Pushbutton: the simplest sensor.

to:

(:cellnr:) Read a Pushbutton The simplest sensor.

Changed lines 27-28 from:

(:cellnr:) Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects.

to:

(:cellnr:) Read a Tilt Sensor These use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 34-37 from:

(:cellnr:) Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

Read a Resistive Sensor?: these include light sensors, temperature sensors and more.

to:

(:cellnr:) Read a Potentiometer This is a knob, one of the simplest analog sensors, used to detect rotation.

Read a Resistive Sensor? These include light sensors, temperature sensors and more.

Restore
November 18, 2006, at 01:07 PM by David A. Mellis -
Changed lines 6-7 from:

(:cellnr width=60%:) Tutorial (:cell width=6%:)

to:

(:cellnr width=63%:) Tutorial (:cell width=3%:)

Restore
November 18, 2006, at 01:06 PM by David A. Mellis -
Changed lines 9-10 from:

(:cellnr:) Digital Output

to:

(:cellnr:) Digital Output

Changed lines 12-13 from:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

to:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

Added lines 14-15:

(:cell:) digital_write (:cellnr:) Knight Rider: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 17-19 from:

digital_write (:cellnr:) Knight Rider: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

(:cell:) digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

Changed lines 21-23 from:

digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

to:

(:cellnr:) Read a Pushbutton: the simplest sensor.

Added lines 23-24:

(:cell:) digital_read_write? (:cellnr:) Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 26-27 from:

(:cellnr:) Read a Pushbutton: the simplest sensor.

to:

(:cell:) digital_read_write? (:cellnr:) Analog Input

Changed lines 30-42 from:

digital_read_write? (:cellnr:) Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:) Analog Input (:cell:) (:cell:) (:cellnr:) Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

to:

(:cellnr:) Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

Restore
November 18, 2006, at 01:06 PM by David A. Mellis -
Changed lines 9-10 from:

(:cellnr:) Digital Output

to:

(:cellnr:) Digital Output

Changed lines 13-14 from:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

to:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

Deleted lines 15-16:

(:cell:) digital_write (:cellnr:) Knight Rider: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 17-18 from:

(:cell:) digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

to:

digital_write (:cellnr:) Knight Rider: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 22-24 from:

(:cellnr:) Read a Pushbutton: the simplest sensor.

to:

digital_write_multiple? digital_write_loop? (:cellnr:) Digital Input

Deleted lines 25-26:

(:cell:) digital_read_write? (:cellnr:) Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 27-28 from:

(:cell:) digital_read_write? (:cellnr:) Analog Input

to:

(:cellnr:) Read a Pushbutton: the simplest sensor.

Changed lines 31-32 from:

(:cellnr:) Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

to:

digital_read_write? (:cellnr:) Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:) Analog Input (:cell:) (:cell:) (:cellnr:) Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

Restore
November 18, 2006, at 01:04 PM by David A. Mellis -
Changed lines 27-30 from:

(:cellnr:) Analog Input Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

to:

(:cellnr:) Analog Input (:cell:) (:cell:) (:cellnr:) Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

Restore
November 18, 2006, at 01:01 PM by David A. Mellis -
Changed lines 21-22 from:

(:cellnr:) Read a Pushbutton: the simplest sensor.

to:

(:cellnr:) Read a Pushbutton: the simplest sensor.

Added lines 24-26:

(:cellnr:) Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write?

Deleted lines 27-30:

Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:)

Restore
November 18, 2006, at 01:00 PM by David A. Mellis -
Added line 21:

(:cellnr:)

Restore
November 18, 2006, at 01:00 PM by David A. Mellis -
Deleted line 18:

Read a Pushbutton: the simplest sensor.

Added lines 20-22:

(:cell:) Read a Pushbutton: the simplest sensor. (:cell:)

Restore
November 18, 2006, at 01:00 PM by David A. Mellis -
Changed lines 9-10 from:

(:cellnr:) Digital Output

to:

(:cellnr:) Digital Output

Added lines 18-21:

(:cellnr:) Digital Input Read a Pushbutton: the simplest sensor. (:cell:) (:cell:) digital_read_write?

Changed lines 23-25 from:

Digital Input

Read a Pushbutton: the simplest sensor.

to:

Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Deleted lines 26-29:

Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects. (:cell:) (:cell:) digital_read_write? (:cellnr:)

Restore
November 18, 2006, at 12:59 PM by David A. Mellis -
Changed lines 9-10 from:

(:cellnr:) Digital Output

to:

(:cellnr:) Digital Output

Restore
November 18, 2006, at 12:59 PM by David A. Mellis -
Added line 20:
Restore
November 18, 2006, at 12:59 PM by David A. Mellis -
Changed line 15 from:

(:cellnr:) Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

(:cellnr:) Knight Rider: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 19-20 from:

Digital Input

to:

Digital Input

Changed lines 21-23 from:
to:

(:cell:) (:cell:) digital_read_write? (:cellnr:)

Changed lines 25-26 from:

Analog Input

to:

(:cell:) (:cell:) digital_read_write? (:cellnr:) Analog Input

Changed lines 38-39 from:

digital_read_write?

to:
Restore
November 18, 2006, at 12:57 PM by David A. Mellis -
Changed line 9 from:

(:cellnr:) !!!! Digital Output

to:

(:cellnr:) Digital Output

Restore
November 18, 2006, at 12:57 PM by David A. Mellis -
Changed line 6 from:

(:cellnr width=60%:) !!!Tutorial

to:

(:cellnr width=60%:) Tutorial

Changed line 8 from:

(:cell width=34%:) !!!circuit and sketch

to:

(:cell width=34%:) Circuit and sketch

Restore
November 18, 2006, at 12:57 PM by David A. Mellis -
Changed lines 16-17 from:

(:cell:) (:cell:) digital_write_multiple? digital_write_loop?

to:

(:cell:) (:cell:) digital_write_multiple? digital_write_loop?

Restore
November 18, 2006, at 12:56 PM by David A. Mellis -
Changed lines 7-8 from:

(:cell width=6%:) (:cell width=34%:) !!!circuit and sketch

to:

(:cell width=6%:) (:cell width=34%:) !!!circuit and sketch

Changed lines 10-11 from:

(:cell:) (:cell:)

to:

(:cell:) (:cell:)

Changed lines 13-14 from:

(:cell:) (:cell:) digital_write

to:

(:cell:) (:cell:) digital_write

Restore
November 18, 2006, at 12:56 PM by David A. Mellis -
Changed lines 6-14 from:

(:cellnr width=60%:)

Tutorial

(:cell width=6%:) (:cell width=34%:)

circuit and sketch

(:cellnr:)

Digital Output

(:cell:) (:cell:)

to:

(:cellnr width=60%:) !!!Tutorial (:cell width=6%:) (:cell width=34%:) !!!circuit and sketch (:cellnr:) !!!! Digital Output (:cell:) (:cell:)

Changed lines 11-12 from:

(:cell:) (:cell:) digital_write

to:

(:cell:) (:cell:) digital_write

Changed lines 13-14 from:

(:cell:) (:cell:) digital_write_multiple? digital_write_loop?

to:

(:cell:) (:cell:) digital_write_multiple? digital_write_loop?

Restore
November 18, 2006, at 12:56 PM by David A. Mellis -
Changed lines 20-21 from:

(:cell:) digital_write_multiple? digital_write_loop?

to:

(:cell:) digital_write_multiple? digital_write_loop?

Restore
November 18, 2006, at 12:55 PM by David A. Mellis -
Changed lines 20-21 from:

(:cell:) digital_write_multiple? [>>] digital_write_loop?

to:

(:cell:) digital_write_multiple? digital_write_loop?

Restore
November 18, 2006, at 12:55 PM by David A. Mellis -
Changed line 20 from:

(:cell:) digital_write_multiple? [\\] digital_write_loop?

to:

(:cell:) digital_write_multiple? [>>] digital_write_loop?

Restore
November 18, 2006, at 12:55 PM by David A. Mellis -
Changed line 20 from:

(:cell:) digital_write_multiple? \\ digital_write_loop?

to:

(:cell:) digital_write_multiple? [\\] digital_write_loop?

Restore
November 18, 2006, at 12:55 PM by David A. Mellis -
Changed lines 20-21 from:

(:cell:) digital_write_multiple? digital_write_loop?

to:

(:cell:) digital_write_multiple? \\ digital_write_loop?

Restore
November 18, 2006, at 12:55 PM by David A. Mellis -
Deleted line 18:
Deleted line 21:
Restore
November 18, 2006, at 12:54 PM by David A. Mellis -
Changed lines 21-22 from:

(:cell:) digital_write_multiple?

to:

(:cell:) digital_write_multiple?

Restore
November 18, 2006, at 12:54 PM by David A. Mellis -
Added lines 17-19:

(:cell:) digital_write (:cellnr:) Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Deleted lines 20-22:

digital_write (:cellnr:) Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Deleted line 21:

(:cell:)

Restore
November 18, 2006, at 12:54 PM by David A. Mellis -
Changed lines 7-9 from:

Tutorials

to:

Tutorial

Changed line 10 from:

circuit and sketch

to:

circuit and sketch

Deleted line 22:
Restore
November 18, 2006, at 12:53 PM by David A. Mellis -
Deleted line 14:

(:cell width=6%:)

Added line 16:

(:cell:)

Deleted lines 17-21:

(:cell width=6%:) (:cell:) sketch: digital_write (:cellnr:) Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

(:cell width=6%:)

Changed lines 19-25 from:
to:

(:cell:) digital_write (:cellnr:) Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

(:cell:) (:cell:)

Restore
November 18, 2006, at 12:53 PM by David A. Mellis -
Changed line 12 from:

Examples

to:

circuit and sketch

Changed lines 25-27 from:

sketch: digital_write_multiple? sketch: digital_write_loop?

to:

digital_write_multiple? digital_write_loop?

Changed lines 45-48 from:

sketch: digital_read_write?

sketch: analog_read_blink?

to:

digital_read_write?

analog_read_blink?

Restore
November 18, 2006, at 12:49 PM by David A. Mellis -
Changed lines 6-7 from:

(:cellnr width=66%:)

to:

(:cellnr width=60%:)

Added line 10:

(:cell width=6%:)

Added line 15:

(:cell width=6%:)

Added line 18:

(:cell width=6%:)

Added line 22:

(:cell width=6%:)

Restore
November 18, 2006, at 12:49 PM by David A. Mellis -
Changed lines 10-11 from:

(:cell width=34%:) !!!!Examples (:cellnr:) !!!! Digital Output

to:

(:cell width=34%:)

Examples

(:cellnr:)

Digital Output

Restore
November 18, 2006, at 12:48 PM by David A. Mellis -
Changed lines 10-15 from:

(:cell width=34%:)

Examples

(:cellnr:)

Digital Output

to:

(:cell width=34%:) !!!!Examples (:cellnr:) !!!! Digital Output

Changed lines 13-16 from:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

to:

(:cellnr:) Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board. (:cell:) sketch: digital_write (:cellnr:) Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 19-20 from:

sketch: digital_write

to:

sketch: digital_write_multiple? sketch: digital_write_loop?

Deleted lines 23-31:

Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

(:cell:)

sketch: digital_write_multiple? sketch: digital_write_loop?

(:cellnr:)

Restore
November 18, 2006, at 12:48 PM by David A. Mellis -
Restore
November 18, 2006, at 12:47 PM by David A. Mellis -
Deleted line 14:
Deleted line 15:
Deleted line 18:
Restore
November 18, 2006, at 12:47 PM by David A. Mellis -
Changed lines 17-18 from:

Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

to:
Deleted lines 19-20:

sketch: digital_write

Changed lines 22-23 from:

Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

to:

Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

Changed lines 26-28 from:

sketch: digital_write_multiple? sketch: digital_write_loop?

to:

sketch: digital_write

Added lines 30-38:

Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

(:cell:)

sketch: digital_write_multiple? sketch: digital_write_loop?

(:cellnr:)

Restore
November 18, 2006, at 12:46 PM by David A. Mellis -
Changed lines 6-7 from:

(:cell width=50%:)

to:

(:cellnr width=66%:)

Added lines 10-15:

(:cell width=34%:)

Examples

(:cellnr:)

Added lines 19-24:

(:cell:)

sketch: digital_write

(:cellnr:)

Added lines 27-33:

(:cell:)

sketch: digital_write_multiple? sketch: digital_write_loop?

(:cellnr:)

Changed lines 48-56 from:

(:cell width=50%:)

Examples

sketch: digital_write

sketch: digital_write_multiple? sketch: digital_write_loop?

to:
Restore
November 18, 2006, at 12:44 PM by David A. Mellis -
Changed lines 11-14 from:
  • Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

  • Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.
to:

Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Changed lines 16-19 from:
to:

Read a Pushbutton: the simplest sensor.

Read a Tilt Sensor: these use the same wiring and code as a push-button, but can detect movement and orientation of objects.

Changed lines 21-28 from:
to:

Read a Potentiometer: this is a knob, one of the simplest analog sensors, used to detect rotation.

Read a Resistive Sensor?: these include light sensors, temperature sensors and more.

Read a Piezo Sensor 3 LED cross-fades with a potentiometer 3 LED color mixer with 3 potentiometers

Changed lines 33-41 from:
to:

sketch: digital_write

sketch: digital_write_multiple? sketch: digital_write_loop?

sketch: digital_read_write?

sketch: analog_read_blink?

Restore
November 18, 2006, at 12:44 PM by David A. Mellis -
Changed lines 8-9 from:

Examples

to:

Tutorials

Added lines 31-32:

Examples

Restore
November 18, 2006, at 12:43 PM by David A. Mellis -
Added lines 1-40:

Arduino Tutorials

Here you will find a growing number of examples and tutorials for accomplishing specific tasks or interfacing to other hardware and software with Arduino. For instructions on getting the board and environment up and running, see the Arduino guide.

(:table width=90% border=0 cellpadding=5 cellspacing=0:) (:cell width=50%:)

Examples

Digital Output

  • Blinking LED: the traditional first task, this tutorial shows you how to turn an LED on and off with your Arduino board.

  • Knight Rider example: connect multiple LEDs to your Arduino board using a breadboard, and turn on them on and off.

Digital Input

Analog Input

(:cell width=50%:)

(:tableend:)

Restore



Bookmark and Share