Tutorial.RobotLogo History

Hide minor edits - Show changes to markup

May 18, 2013, at 07:55 AM by Scott Fitzgerald -
Changed line 36 from:
to:
May 18, 2013, at 07:53 AM by Scott Fitzgerald -
Changed lines 36-171 from:
to:
May 17, 2013, at 06:17 PM by David Cuartielles -
Changed lines 177-178 from:
to:
May 17, 2013, at 09:02 AM by Scott Fitzgerald -
Changed lines 5-6 from:

This sketch shows you basic movements of the Robot. When the sketch starts, press the D-pad to instruct the robot how to move. After that, press the middle key to finish and put your robot on the floor for it to follow the directions you programmed.

to:

This sketch shows you basic movement with the Robot. When the sketch starts, press the buttons ont he control board to indicate the direction you want the robot to move. After you've keyed in your sequence (up to 20 steps at a time), press the middle button to record the steps to memory. Put your robot on the floor for it to follow the directions you programmed.

Changed lines 15-21 from:
  1. Place the robot on empty floor, so there's enough space for it to move around.
  2. After the starting screen, robot will ask you to add commands with d-pad.
  3. Press the d-pad according to how you want the robot to move, the commands will be stored and executed later.
  4. Left makes the robot turn left for 90 degrees, right makes it turn right. Up makes the robot go forward for 1 second, down makes it go backwards.
  5. After you're done with your commands, press middle button so the robot will start executing them promptly. There can be at most 20 commands, so if you fill them all, the robot will start executing without you pressing the middle button
  6. The robot will return to the 3rd step. Adjust your commands and do it again!
to:
  1. Place the robot on the floor, in a clear space, so it can move around.
  2. After the starting images on the screen, the robot will ask you to add commands.
  3. Press the buttons according to how you want the robot to move; the commands will be stored and executed later.
  4. Left makes the robot turn left for 90 degrees, right makes it turn right. Up makes the robot go forward for 1 second, down makes it go backwards for 1 second.
  5. After you're done with the commands, press the middle button. The robot will start executing the commands in order. At most, the robot will remember 20 commands. If you fill them all, the robot will start executing before you press the middle button
  6. After running the sequence, the robot will return to the 3rd step. Adjust your commands and do it again!
May 15, 2013, at 01:03 PM by Scott Fitzgerald -
Changed lines 36-171 from:
to:
May 09, 2013, at 11:06 PM by Xun Yang -
Changed lines 20-21 from:
  1. The robot will return to the 3rd step. adjust your commands and do it again!
to:
  1. The robot will return to the 3rd step. Adjust your commands and do it again!
May 09, 2013, at 11:04 PM by Xun Yang -
Added lines 12-21:

Instruction

  1. Upload the example, unplug USB and turn on power
  2. Place the robot on empty floor, so there's enough space for it to move around.
  3. After the starting screen, robot will ask you to add commands with d-pad.
  4. Press the d-pad according to how you want the robot to move, the commands will be stored and executed later.
  5. Left makes the robot turn left for 90 degrees, right makes it turn right. Up makes the robot go forward for 1 second, down makes it go backwards.
  6. After you're done with your commands, press middle button so the robot will start executing them promptly. There can be at most 20 commands, so if you fill them all, the robot will start executing without you pressing the middle button
  7. The robot will return to the 3rd step. adjust your commands and do it again!
May 03, 2013, at 11:34 AM by Xun Yang -
Changed lines 1-2 from:

Examples > Lottie Lemon?

to:

Examples > Robot

May 03, 2013, at 06:36 AM by David Cuartielles -
Added lines 1-37:

Share