Main.ArduinoBoardBluetooth History

Hide minor edits - Show changes to markup

June 08, 2010, at 04:40 AM by Equipo Traduccion -
Changed lines 15-16 from:

El módulo Bluetooth utilizado es el Bluegiga WT11, la versión iWrap (detalles y hoja de información [pdf]). El módulo Bluetooth se puede configurarse con comandos enviados a través del puerto serie del ATmega168 (consulta la guía del usuario iWrap para más detalles). Un programa para configurar el nombre y código del módulo bluetooth se ejecuta una vez en cada BT Arduino. El nombre se establece en ARDUINOBT y el código de acceso en 12345. Para obtener detalles más completos, ve al código fuente del programa Initialization. El ATmega168 viene precargado con un gestor de arranque que te permite subir sketches al consejo de administración a través de bluetooth. El código fuente del gestor de arranque está disponible en el repositorio SVN de Arduino.

to:

El módulo Bluetooth utilizado es el Bluegiga WT11, la versión iWrap (detalles y hoja de información [pdf]). El módulo Bluetooth se puede configurar con comandos enviados a través del puerto serie del ATmega168 (consulta la guía del usuario iWrap para más detalles). Un programa para configurar el nombre y código del módulo bluetooth se ejecuta una vez en cada BT Arduino. El nombre se establece en ARDUINOBT y el código de acceso en 12345. Para obtener detalles más completos, ve al código fuente del programa Initialization. El ATmega168 viene precargado con un gestor de arranque que te permite subir sketches al consejo de administración a través de bluetooth. El código fuente del gestor de arranque está disponible en el repositorio SVN de Arduino.

June 08, 2010, at 04:39 AM by Equipo Traduccion -
Changed lines 15-18 from:

El módulo Bluetooth utilizado es el Bluegiga WT11, la versión iWrap (detalles y hoja de información [pdf]). El módulo Bluetooth se puede configurar con comandos que se distribuyen en el puerto de serie de la ATmega168 (consulte la guía del usuario iWrap para más detalles). Un programa para establecer el nombre y código del módulo bluetooth se ejecuta una vez en cada BT Arduino. El nombre se establece en ARDUINOBT y el código de acceso a la 12345. Para obtener detalles completos, vea el código del programa initializiation la fuente. El ATmega168 viene precargado con un gestor de arranque que le permite subir bocetos al consejo de administración a través de bluetooth. El código fuente del gestor de arranque está disponible en el repositorio SVN de Arduino.

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

El módulo Bluetooth utilizado es el Bluegiga WT11, la versión iWrap (detalles y hoja de información [pdf]). El módulo Bluetooth se puede configurarse con comandos enviados a través del puerto serie del ATmega168 (consulta la guía del usuario iWrap para más detalles). Un programa para configurar el nombre y código del módulo bluetooth se ejecuta una vez en cada BT Arduino. El nombre se establece en ARDUINOBT y el código de acceso en 12345. Para obtener detalles más completos, ve al código fuente del programa Initialization. El ATmega168 viene precargado con un gestor de arranque que te permite subir sketches al consejo de administración a través de bluetooth. El código fuente del gestor de arranque está disponible en el repositorio SVN de Arduino.

June 08, 2010, at 04:28 AM by Equipo Traduccion -
Changed lines 3-14 from:

The Arduino BT is an Arduino board with built-in bluetooth module, allowing for wireless communication.

In addition, it has some other differences from an Arduino NG:

  • The use of a DC-DC convertor, allowing the board to be powered with a minimum of 1.2 V, but with a maximum of 5.5 V. Higher voltages or reversed polarity in the power supply will kill the board.

  • A surface-mounted ATmega168 (as with the Arduino Mini). This doubles the amount of space available for your sketches and adds three more PWM pins and two more analog inputs.

  • Pin 7 is connected to the reset pin of the bluetooth module.

  • Only use serial communication at 115200 baud; this is the speed that the module has been configured to use.
to:

El Arduino BT es una placa Arduino con el módulo Blueetooh incorporado, que permite la comunicación inalámbrica.

Además, tiene otras diferencias con un Arduino NG:

  • El uso de un convertidor DC-DC, lo que permite que la placa sea alimentada con un mínimo de 1,2 V, pero con un máximo de 5,5 V. Los voltajes superiores o la polaridad invertida en la fuente de alimentación estropeará la placa.

  • Un ATmega168 para montaje en superficie (como con el Arduino Mini). Esto duplica la cantidad de espacio disponible para tus sketches y agrega tres pines PWM más y dos entradas analógicas.

  • El Pin 7 está conectado al pin de reinicio (reset) del módulo bluetooth.

  • Utiliza sólo la comunicación serie a 115200 baudios, que es la velocidad a la que el módulo ha sido configurado para usar.

El módulo Bluetooth utilizado es el Bluegiga WT11, la versión iWrap (detalles y hoja de información [pdf]). El módulo Bluetooth se puede configurar con comandos que se distribuyen en el puerto de serie de la ATmega168 (consulte la guía del usuario iWrap para más detalles). Un programa para establecer el nombre y código del módulo bluetooth se ejecuta una vez en cada BT Arduino. El nombre se establece en ARDUINOBT y el código de acceso a la 12345. Para obtener detalles completos, vea el código del programa initializiation la fuente. El ATmega168 viene precargado con un gestor de arranque que le permite subir bocetos al consejo de administración a través de bluetooth. El código fuente del gestor de arranque está disponible en el repositorio SVN de Arduino.

Changed lines 19-20 from:
to:

Diseño de referencia: arduino-bt-reference-design.zip
Esquema: arduino_bt06.pdf

April 15, 2009, at 03:19 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). (NOTE: the URL is http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11_datasheet.pdf. If you have trouble with the link, cut and paste this version. PMwiki doesn't like the escaped space chracter.) The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:19 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). (NOTE: the URL is http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11_Datasheet-08.pdf. If you have trouble with the link, cut and paste this version. PMwiki doesn't like the escaped space chracter.) The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). (NOTE: the URL is http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11_datasheet.pdf. If you have trouble with the link, cut and paste this version. PMwiki doesn't like the escaped space chracter.) The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:17 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). (NOTE: the URL is http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11_Datasheet-08.pdf. If you have trouble with the link, cut and paste this version.) The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). (NOTE: the URL is http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11_Datasheet-08.pdf. If you have trouble with the link, cut and paste this version. PMwiki doesn't like the escaped space chracter.) The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:16 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). (NOTE: the URL is http://www.bluegiga.com/files/bluegiga/Pub%20files/WT11_Datasheet-08.pdf. If you have trouble with the link, cut and paste this version.) The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:11 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:11 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:10 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:10 PM by Tom Igoe -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

April 15, 2009, at 03:09 PM by Tom Igoe -
August 15, 2008, at 09:12 PM by David A. Mellis -
Changed lines 15-16 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

October 22, 2007, at 08:56 PM by David A. Mellis -
Changed line 17 from:
to:

Reference Design: arduino-bt-reference-design.zip \\

October 22, 2007, at 08:50 PM by David A. Mellis -
Added line 17:
February 27, 2007, at 12:06 AM by David A. Mellis -
Changed line 17 from:
to:

Schematic: arduino_bt06.pdf

February 27, 2007, at 12:04 AM by David A. Mellis -
Changed lines 15-17 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

Schematic: Attach:arduino_bt06.pdf

January 27, 2007, at 03:47 PM by David A. Mellis -
Changed line 15 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code. The ATmega168 comes preloaded with a bootloader that allows you to upload sketches to the board via bluetooth. The bootloader source code is available in the Arduino SVN repository.

January 27, 2007, at 02:49 PM by David A. Mellis -
Added lines 13-14:
  • Only use serial communication at 115200 baud; this is the speed that the module has been configured to use.
January 27, 2007, at 02:41 PM by David A. Mellis -
Changed line 13 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345.

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345. For complete details, see the initializiation program's source code.

January 27, 2007, at 02:38 PM by David A. Mellis -
Changed line 13 from:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168. A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to "ARDUINOBT" and the pass code to "12345".

to:

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168 (see the iWrap user's guide [pdf] for details). A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to ARDUINOBT and the pass code to 12345.

January 27, 2007, at 02:35 PM by David A. Mellis -
Added lines 1-13:

Arduino BT

The Arduino BT is an Arduino board with built-in bluetooth module, allowing for wireless communication.

In addition, it has some other differences from an Arduino NG:

  • The use of a DC-DC convertor, allowing the board to be powered with a minimum of 1.2 V, but with a maximum of 5.5 V. Higher voltages or reversed polarity in the power supply will kill the board.

  • A surface-mounted ATmega168 (as with the Arduino Mini). This doubles the amount of space available for your sketches and adds three more PWM pins and two more analog inputs.

  • Pin 7 is connected to the reset pin of the bluetooth module.

The bluetooth module used is the Bluegiga WT11, iWrap version (details and datasheet [pdf]). The bluetooth module can be configured with commands set over the serial port from the ATmega168. A program to set the name and pass code of the bluetooth module is run once on each Arduino BT. The name is set to "ARDUINOBT" and the pass code to "12345".

Share