Main.ArduinoBoardSerialSingleSided3 History
Hide minor edits - Show changes to markup
Arduino Single-Sided Serial Board (version 3)
If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. It is pin-compatible with the Arduino Diecimila, and should work with any Arduino shield.
This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi, based on the previous version.
Placa Arduino monocapa (versión 3)
Si no tienes te es fácil conseguir una placa Arduino comprandola montada o en kit, puedes grabar este diseño de PCB a mano y soldar en el los componentes. Es compatible con los pines de la Arduino Diecimila y debe funcionar con cualquier shiel de Arduino.
Esta es la tercera revisión de la placa: la Arduino serie monocapa versión 3 o s3v3 o Arduino Severino. Ha sudo diseñada por Adilson Akashi, basandose en la versión anterior.
These files are licensed under the Creative Commons Attribution Share-Alike 2.5 license.
Estos archivos están bajo licencia licencia Creative Commons Attribution Share-Alike 2.5.
These files are licensed under the Creative Commons Attribution Share-Alike 2.5 license.
This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.
This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi, based on the previous version.
Arduino Single-Sided Serial Board
Arduino Single-Sided Serial Board (version 3)
If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.
If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. It is pin-compatible with the Arduino Diecimila, and should work with any Arduino shield.
This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.
Arduino Single-Sided Serial Board
If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.
