Main.ArduinoBoardSerialSingleSided3 History

Show minor edits - Show changes to markup

June 04, 2010, at 10:54 AM by Equipo Traduccion -
Changed lines 1-6 from:

Arduino Single-Sided Serial Board (version 3)

If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. It is pin-compatible with the Arduino Diecimila, and should work with any Arduino shield.

This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi, based on the previous version.

to:

Placa Arduino monocapa (versión 3)

Si no tienes te es fácil conseguir una placa Arduino comprandola montada o en kit, puedes grabar este diseño de PCB a mano y soldar en el los componentes. Es compatible con los pines de la Arduino Diecimila y debe funcionar con cualquier shiel de Arduino.

Esta es la tercera revisión de la placa: la Arduino serie monocapa versión 3 o s3v3 o Arduino Severino. Ha sudo diseñada por Adilson Akashi, basandose en la versión anterior.

Changed lines 9-14 from:
to:
Changed lines 17-19 from:

Mounting diagram (.png)

These files are licensed under the Creative Commons Attribution Share-Alike 2.5 license.

to:

Diagrama de montaje (.png)

Estos archivos están bajo licencia licencia Creative Commons Attribution Share-Alike 2.5.

January 04, 2009, at 09:51 AM by David A. Mellis -
Changed lines 15-16 from:
to:
March 09, 2008, at 11:56 PM by David A. Mellis -
Changed lines 13-14 from:
to:
March 05, 2008, at 04:36 PM by David A. Mellis -
Changed lines 17-19 from:
to:

Mounting diagram (.png)

These files are licensed under the Creative Commons Attribution Share-Alike 2.5 license.

March 05, 2008, at 04:35 PM by David A. Mellis -
Changed lines 5-6 from:

This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.

to:

This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi, based on the previous version.

March 05, 2008, at 04:34 PM by David A. Mellis -
Added lines 9-10:
March 05, 2008, at 04:30 PM by David A. Mellis -
Changed lines 1-2 from:

Arduino Single-Sided Serial Board

to:

Arduino Single-Sided Serial Board (version 3)

March 05, 2008, at 04:40 AM by David A. Mellis -
Changed lines 11-12 from:
to:
March 05, 2008, at 04:39 AM by David A. Mellis -
Changed lines 3-4 from:

If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.

to:

If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. It is pin-compatible with the Arduino Diecimila, and should work with any Arduino shield.

This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.

Changed lines 9-13 from:
to:
March 05, 2008, at 04:31 AM by David A. Mellis -
Added lines 1-7:

Arduino Single-Sided Serial Board

If you don't have an easy way to order an Arduino board or kit, you can etch this PCB design by hand and solder it together. This is the third revision of the board: the Arduino Single-Sided Serial version 3, or s3v3, or Arduino Severino. It was designed by Adilson Akashi.

Share