Main.Hardware History

Show minor edits - Show changes to markup

June 07, 2010, at 12:12 AM by Equipo Traduccion -
Changed lines 6-7 from:

Nota: Los diseños y esquemas de Arduino se distribuyen bajo licencia Creative Commons Attribution-ShareAlike 2.5. Mira ¿Quieres hacer un Arduino? para indicaciones en producir tu propio hardware.

to:

Nota: Los diseños y esquemas de Arduino se distribuyen bajo licencia Creative Commons Attribution-ShareAlike 2.5. Mira ¿Quieres hacer un Arduino? para indicaciones sobre como producir tu propio hardware.

June 07, 2010, at 12:11 AM by Equipo Traduccion -
Changed lines 4-5 from:

. La anterior Diecimila, y las primeras unidades de Duemilanove usaban el Atmel ATmega168 (datasheet), mientras que las placas mas antiguas usan el ATmega8 [http://www.atmel.com/dyn/resources/prod_documents/doc2486.pdf | datasheet]]). El Arduino Mega esta basado en el ATmega1280 (datasheet).

to:

. La anterior Diecimila, y las primeras unidades de Duemilanove usaban el Atmel ATmega168 (datasheet), mientras que las placas mas antiguas usan el ATmega8 (datasheet). El Arduino Mega esta basado en el ATmega1280 (datasheet).

June 07, 2010, at 12:10 AM by Equipo Traduccion -
Changed lines 2-37 from:

Existen multitud versiones de la placa Arduino. La versión básica actual, "Duemilanove",usa un microcontrolador Atmel ATMega 328(datasheet). La versión anterior,"Diecimila", y la primera versión, "Duemilanoves", usaban el microcontrolador Atmel ATmega168 (datasheet), mientras que las primeras versiones de la placa, usaban ATmega8 (datasheet). La version "Mega" utiliza un ATmega1280(datasheet).

Nota: Los diseños estan bajo licencia Creative Commons Attribution-ShareAlike 2.5. Visita Quieres hacer un Arduino? para más información y guias de cómo producir tu propio hardware.

I/O Boards

  • Duemilanove - Última versión de la placa básica Arduino USB. Se conecta al ordenador mediante un cable estardar USB y contiene todo lo necesario para programar y usar la placa. Puedes ampliar con variedad de "shields": placas a medida para ampliar requisitos específicos hardware. detalles

  • Diecimila - Versión anterior de la placa básica Arduino USB.detalles

  • Nano - Versión compacta diseñada para uso en protoboards.Nano se conecta al ordenador usando un cable USB Mini-B. detalles

  • Mega - Versión más potente y grande, compatible con shields de Duemilanove y Diecimila. detalles

  • Bluetooth - Versión que incluye un módulo bluetooth que permite la comunicación wireless y programación de la placa. Es compatible con las shields de Arduino. detalles

  • LilyPad - Versión diseñada para ser cosida en ropa, telas o aplicaciones flexibles. detalles

  • Fio - Versión diseñada para aplicaciones wireless. Incluye un socket para incluir una radio XBee, un conector para una bateria LiPo, y un circuito para la carga de la misma. detalles

  • Mini - Versión más pequeña de las placas Arduino. Funciona para aplicaciones de placa de prototipos ó en aquellas que el espacio es primordial. Se conecta al ordenador mediante un adaptador Mini USB. detalles

  • Mini USB Adapter - Esta placa convierte una conexión USB a serie RS232 con las siguientes lineas: 5 voltios, GND, TX y RX, las cuales puedes conectar a tu Arduino Mini u otros microcontroladores. detalles

  • Pro - Versión diseñado para usuarios avanzados, cuyo objetivo es una aplicación final embebida: es más barata que la versión Diecimila y fácil de alimentar con una bateria, pero requiere componentes adicionales y ensamblado. detalles

  • Pro Mini - Versión similar a la versión Pro, diseñada para usuarios avanzados, que requieren un sistema de bajo coste, tamaño compacto y dispuestos a realizar un trabajo extra hardware. detalles

  • Serial - Versión básica que usa un interfaz RS232 para la comunicación y/o programación. Esta placa es fácil de montar, incluso recomendable como ejercicio de aprendizaje. detalles (incluye Esquemáticos y archivos CAD)

  • Serial Single Sided - Versión diseñada para ser grabada y montada a mano. Es algo mayor que Dicimila, pero compatible con las shields. details

¿Buscando versiones antiguas?

El listado hardware? de todas las placas Arduino y las diferencias entre ellas.

to:

Hay multitud de diferentes versiones de placas Arduino. La actual placa básica, el Duemilanove, usa Atmel ATmega328 (datasheet) . La anterior Diecimila, y las primeras unidades de Duemilanove usaban el Atmel ATmega168 (datasheet), mientras que las placas mas antiguas usan el ATmega8 [http://www.atmel.com/dyn/resources/prod_documents/doc2486.pdf | datasheet]]). El Arduino Mega esta basado en el ATmega1280 (datasheet).

Nota: Los diseños y esquemas de Arduino se distribuyen bajo licencia Creative Commons Attribution-ShareAlike 2.5. Mira ¿Quieres hacer un Arduino? para indicaciones en producir tu propio hardware.

Placas de E/S

  • Duemilanove - Esta es la ultima revisión de la placa Arduino USB básica. Se conecta al ordenador con un cable USB estándar y contiene todo lo necesario para programar la placa. Se puede ampliar con gran variedad de shields: placas de extensión con funcionalidades especificas. Mas info.

  • Diecimila - Esta es la revisión anterior de la placa USB básica. Mas Info

  • Nano - Una placa compacta diseñada para usar directamente en placas de desarrollo, el Nano se conecta al ordenador con un cable Mini-B USB. Mas Info

  • Mega - Mas grande y potente placa Arduino, compatible con los shields de Duemilanove y Diecimila. Mas Info

  • Bluetooth - El Arduino BT contiene un modulo bluetooth que permite comunicarse y programarse sin cables. Es compatible con los shields de Arduino. Mas Info

  • LilyPad - Diseñado para aplicaciones sobre prendas, esta placa puede ser cosida a la ropa y es de color purpura y con un diseño con estilo. Mas Info

  • Fio - Diseñada para aplicaciones inalámbricas. Incluye un zócalo para XBee, un conector para baterías LiPo y electrónica para cargar baterías. Mas Info

  • Mini - La placa Arduino mas pequeña. Funciona perfectamente en una placa de desarrollo o en aplicaciones donde el espacio es primordial. Se conecta al ordenador usando el adaptador Mini USB. Mas Info

  • Adaptador Mini USB - Esta placa convierte una conexión USB en 5 voltios , toma tierra, lineas TX y RX que puedes conectar al Arduino Mini o a otro micro controlador. Mas Info

  • Pro - Esta placa esta diseñada para aquellos que quien dejar la placa incrustada en el proyecto: es mas barata que la Diecimila y se puede alimentar fácilmente con baterías. pero requiere de componentes extra y montaje. Mas Info

  • Pro Mini - Como la Pro, la Pro Mini esta diseñada para usuarios avanzados que requieren de bajo coste, menor tamaño y dispuestos a un poco de trabajo extra. Mas Info

  • Serial - Placa básica que utiliza una interfaz RS232 como comunicación con el ordenador para programar o intercambiar datos. Esta placa es fácil de montar incluso como ejercicio didáctico. Mas Info

  • Serial a una cara (Single Sided) - Esta placa esta diseñada para ser trazada y montada a mano. es un poco mas grande que la Diecimila, pero compatible con los shields. Mas Info

Buscas una placa mas antigua?

El índice de hardware lista todas las placas Arduino realizadas y las diferencias entre ellas.

Changed lines 41-58 from:

Shields son placas montadas sobre Arduino y que extienden la funcionabilidad de la misma para controlar diferentes dispositivos, adquirir datos,etc.

  • Xbee Shield - Permite comunicar de forma inalámbrica diferentes placas Arduino a distancias hasta 30 metros (interiores) y hasta 90 metros(exteriores) usando el módulo Maxstream Xbee Zigbee. detalles

  • Motor Shield - Permite controlar a una placa Arduino un motor CC y leer encoders. detalles

  • Ethernet Shield - Permite conectar a una placa Arduino con internet. detalles

Third-Party Hardware recomendado

Productos de otros que nosotros hemos probado y referenciado; compatible con el software Arduino.

  • Boarduino de Adafruit Industries. Para uso en placas de prototipos usando el conversor USB-a-TTL-Serie de FTDI u otros adaptadores de USB-a-serie. Disponible como PCB o kit.

Otros Hardware relacionados

También puedes visitar listado hardware en el playground.

to:

Los Shields son placas que se colocan encima de la placa Arduino y que amplían una nueva función para que sea controlada desde Arduino, para controlar diferentes aparatos, adquirir datos, etc.

  • Shield Xbee - Este shield permite conectar inalámbricamente varios Arduino a distancias de 100 pies en edificios y 300 pies en el exterior usando el módulo Maxstream Xbee Zigbee. Mas Info

  • Shield Motores- Este shield permite a Arduino controlar motores eléctricos de corriente continua, servos y motores paso a paso y leer encoders. Mas info

  • Shield Ethernet - Este shield permite a una placa Arduino conectarse a una red Ethernet y tener acceso a y desde Internet. Mas info

Hardware de terceros recomendado

Productos de otros que hemos probado y nos gustan, compatibles con el software de Arduino.

  • Boarduino de Adafruit Industries. Para usar en placas de desarrollo junto a un cable FTDI USB-to-TTL-Serie o otro adaptador de USB a serie. Disponible solo el PCB o en formato de kit.

Mas hardware relacionado

Comprueba la lista de hardware relacionado mantenida por la comunidad en el apartado playground.

June 06, 2010, at 10:31 PM by Equipo Traduccion -
Changed lines 49-50 from:

Porductos de otros que nosotros hemos probado y referenciado; compatible con el software Arduino.

to:

Productos de otros que nosotros hemos probado y referenciado; compatible con el software Arduino.

June 06, 2010, at 10:27 PM by Equipo Traduccion -
Changed lines 24-25 from:
  • Mini USB Adapter - Esta placa convierte una conexión USB a serie con las sguientes lineas: 5 voltios, GND, TX y RX, las cuales puedes conectar a tu Arduino Mini u otros microcontroladores. detalles
to:
  • Mini USB Adapter - Esta placa convierte una conexión USB a serie RS232 con las siguientes lineas: 5 voltios, GND, TX y RX, las cuales puedes conectar a tu Arduino Mini u otros microcontroladores. detalles
June 06, 2010, at 10:26 PM by Equipo Traduccion -
Changed lines 24-25 from:
  • Mini USB Adapter - Esta placa extrae una conexión USB en las sguientes lineas: 5 voltios, GND, TX y RX, las cuales puedes conectar a tu Arduino Mini u otros microcontroladores. detalles
to:
  • Mini USB Adapter - Esta placa convierte una conexión USB a serie con las sguientes lineas: 5 voltios, GND, TX y RX, las cuales puedes conectar a tu Arduino Mini u otros microcontroladores. detalles
June 06, 2010, at 05:56 PM by Equipo Traduccion -
Changed lines 41-42 from:
  • Xbee Shield - Permite comunicar de forma inalámbrica diferentes placas Arduino a distancias hasta 100 pies (interiores) y hasta 300 pies (exteriores) usando el módulo Maxstream Xbee Zigbee. detalles
to:
  • Xbee Shield - Permite comunicar de forma inalámbrica diferentes placas Arduino a distancias hasta 30 metros (interiores) y hasta 90 metros(exteriores) usando el módulo Maxstream Xbee Zigbee. detalles
June 06, 2010, at 05:49 PM by Equipo Traduccion -
Changed lines 53-54 from:

Other Related Hardware

to:

Otros Hardware relacionados

June 06, 2010, at 05:45 PM by Equipo Traduccion -
Changed lines 2-3 from:

Existen multitud versiones de la placa Arduino. La versión básica actual, "Duemilanove",usa un microcontrolador Atmel ATMega 328.(datasheet). La versión anterior,"Diecimila", y la primera versión, "Duemilanoves", usaban el microcontrolador Atmel ATmega168 (datasheet), mientras que las primeras versiones de la placa, usaban ATmega8 (datasheet). La version "Mega" utiliza un ATmega1280(datasheet).

to:

Existen multitud versiones de la placa Arduino. La versión básica actual, "Duemilanove",usa un microcontrolador Atmel ATMega 328(datasheet). La versión anterior,"Diecimila", y la primera versión, "Duemilanoves", usaban el microcontrolador Atmel ATmega168 (datasheet), mientras que las primeras versiones de la placa, usaban ATmega8 (datasheet). La version "Mega" utiliza un ATmega1280(datasheet).

June 06, 2010, at 05:44 PM by Equipo Traduccion -
Changed lines 18-19 from:
  • LilyPad - Versión diseñada para aplicaciones en ropa, dicha placa puede ser cosida. detalles
to:
  • LilyPad - Versión diseñada para ser cosida en ropa, telas o aplicaciones flexibles. detalles
June 06, 2010, at 05:43 PM by Equipo Traduccion -
June 06, 2010, at 05:38 PM by Equipo Traduccion -
Changed lines 34-35 from:

Buscando versiones antiguas?

to:

¿Buscando versiones antiguas?

June 06, 2010, at 05:29 PM by Equipo Traduccion -
Changed lines 16-17 from:
  • Bluetooth - Versión que incluye un módulo bluetooh que permite la comunicación wireless y programación de la placa. Es compatible con las shields de Arduino. detalles
to:
  • Bluetooth - Versión que incluye un módulo bluetooth que permite la comunicación wireless y programación de la placa. Es compatible con las shields de Arduino. detalles
June 06, 2010, at 05:27 PM by Equipo Traduccion -
June 06, 2010, at 05:26 PM by Equipo Traduccion -
Changed lines 4-5 from:

Nota: Los diseños estan bajo licencia Creative Commons license Attribution-ShareAlike 2.5. Visita Quieres hacer un Arduino? para más información y guias de cómo producir tu propio hardware.

to:

Nota: Los diseños estan bajo licencia Creative Commons Attribution-ShareAlike 2.5. Visita Quieres hacer un Arduino? para más información y guias de cómo producir tu propio hardware.

June 06, 2010, at 05:26 PM by Equipo Traduccion -
Changed lines 16-17 from:
  • Bluetooth - Versión que incluye un módulo bluetooh que permite la comunicación wireless y programación de la plca. Es compatible con las shields de Arduino. detalles
to:
  • Bluetooth - Versión que incluye un módulo bluetooh que permite la comunicación wireless y programación de la placa. Es compatible con las shields de Arduino. detalles
June 06, 2010, at 05:22 PM by Equipo Traduccion -
Changed lines 49-50 from:

Porductos de otros que nosotros hemos probado y linkado; compatible con el software Arduino.

to:

Porductos de otros que nosotros hemos probado y referenciado; compatible con el software Arduino.

June 06, 2010, at 05:22 PM by Equipo Traduccion - igorreal[at]gmail.com
Changed lines 49-52 from:

Products from others that we've tried and liked; compatible with the Arduino software.

  • Boarduino from Adafruit Industries. For use in bread-boards with FTDI USB-to-TTL-Serial cable or other USB-to-serial adapter. Available as a bare PCB or in kit form.
to:

Porductos de otros que nosotros hemos probado y linkado; compatible con el software Arduino.

  • Boarduino de Adafruit Industries. Para uso en placas de prototipos usando el conversor USB-a-TTL-Serie de FTDI u otros adaptadores de USB-a-serie. Disponible como PCB o kit.
June 06, 2010, at 05:17 PM by Equipo Traduccion -
Changed lines 39-40 from:

Shields son placas montadas sobre las placas de Arduino y que extienden la funcionabilidad de la misma para controlar diferentes dispositivos, adquirir datos,etc.

to:

Shields son placas montadas sobre Arduino y que extienden la funcionabilidad de la misma para controlar diferentes dispositivos, adquirir datos,etc.

June 06, 2010, at 05:16 PM by Equipo Traduccion - igorreal[at]gmail.com
Changed lines 39-48 from:

Shields are boards to be mounted on top of the Arduino board and that extend the functionality of Arduino to control different devices, acquire data, etc.

  • Xbee Shield - This shield allows multiple Arduino boards to communicate wirelessly over distances up to 100 feet (indoors) or 300 feet (outdoors) using the Maxstream Xbee Zigbee module. details

  • Motor Shield - This shield allows an Arduino board to control DC motors and read encoders. details

  • Ethernet Shield - This shield allows an Arduino board to connect to the internet. details

Recommended Third-Party Hardware

to:

Shields son placas montadas sobre las placas de Arduino y que extienden la funcionabilidad de la misma para controlar diferentes dispositivos, adquirir datos,etc.

  • Xbee Shield - Permite comunicar de forma inalámbrica diferentes placas Arduino a distancias hasta 100 pies (interiores) y hasta 300 pies (exteriores) usando el módulo Maxstream Xbee Zigbee. detalles

  • Motor Shield - Permite controlar a una placa Arduino un motor CC y leer encoders. detalles

  • Ethernet Shield - Permite conectar a una placa Arduino con internet. detalles

Third-Party Hardware recomendado

Changed lines 55-56 from:

Also check out the community-maintained list of related hardware on the playground.

to:

También puedes visitar listado hardware en el playground.

June 06, 2010, at 05:10 PM by Equipo Traduccion -
Changed lines 36-37 from:

Las listado hardwarelistado? de todas las placas Arduino y las diferencias entre ellas.

to:

El listado hardware? de todas las placas Arduino y las diferencias entre ellas.

June 06, 2010, at 05:09 PM by Equipo Traduccion -
Changed lines 26-27 from:
  • Pro - Versión diseñado para usuarios avanzados, cuyo objetivo es una aplicación final embebida: es más barata que la versión Diecimila and fácil de alimentar con una bateria, pero requiere componentes adicionales y ensamblado. detalles
to:
  • Pro - Versión diseñado para usuarios avanzados, cuyo objetivo es una aplicación final embebida: es más barata que la versión Diecimila y fácil de alimentar con una bateria, pero requiere componentes adicionales y ensamblado. detalles
Changed lines 32-37 from:
  • Serial Single Sided - This board is designed to be etched and assembled by hand. It is slightly larger than the Diecimila, but still shield compatible. details

Looking for an older board?

The hardware index lists all the Arduino boards made and the differences between them.

to:
  • Serial Single Sided - Versión diseñada para ser grabada y montada a mano. Es algo mayor que Dicimila, pero compatible con las shields. details

Buscando versiones antiguas?

Las listado hardwarelistado? de todas las placas Arduino y las diferencias entre ellas.

June 06, 2010, at 04:50 PM by Equipo Traduccion - igorreal[at]gmail.com
Changed lines 28-29 from:
  • Pro Mini - Versión similar a la versión Pro, diseñada para usuarios avanzados, que requieren un sistema de bajo coste, tamaño compacto y dispuestos a realizar un extra trabajo hardware. detalles
to:
  • Pro Mini - Versión similar a la versión Pro, diseñada para usuarios avanzados, que requieren un sistema de bajo coste, tamaño compacto y dispuestos a realizar un trabajo extra hardware. detalles
June 06, 2010, at 04:48 PM by Equipo Traduccion -
Changed lines 22-31 from:
  • Mini - This is the smallest Arduino board. It works well in a breadboard or for applications in which space is at a premium. It connects to the computer using the Mini USB Adapter. details

  • Mini USB Adapter - This board converts a USB connection into 5 volt, GND, TX and RX lines that you can connect to the Arduino Mini or other microcontroller. details

  • Pro - This board is designed for advanced users who want to leave a board embedded in a project: it's cheaper than a Diecimila and easily powered by a battery, but requires additional components and assembly. details

  • Pro Mini - Like the Pro, the Pro Mini is designed for advanced users requiring a low-cost, small board and willing to do some extra work. details

  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise. details (including Schematics and CAD Files)
to:
  • Mini - Versión más pequeña de las placas Arduino. Funciona para aplicaciones de placa de prototipos ó en aquellas que el espacio es primordial. Se conecta al ordenador mediante un adaptador Mini USB. detalles

  • Mini USB Adapter - Esta placa extrae una conexión USB en las sguientes lineas: 5 voltios, GND, TX y RX, las cuales puedes conectar a tu Arduino Mini u otros microcontroladores. detalles

  • Pro - Versión diseñado para usuarios avanzados, cuyo objetivo es una aplicación final embebida: es más barata que la versión Diecimila and fácil de alimentar con una bateria, pero requiere componentes adicionales y ensamblado. detalles

  • Pro Mini - Versión similar a la versión Pro, diseñada para usuarios avanzados, que requieren un sistema de bajo coste, tamaño compacto y dispuestos a realizar un extra trabajo hardware. detalles

  • Serial - Versión básica que usa un interfaz RS232 para la comunicación y/o programación. Esta placa es fácil de montar, incluso recomendable como ejercicio de aprendizaje. detalles (incluye Esquemáticos y archivos CAD)
June 06, 2010, at 04:31 PM by Equipo Traduccion -
Changed lines 16-21 from:
  • Bluetooth - The Arduino BT contains a bluetooth module that allows for wireless communication and programming. It is compatible with Arduino shields. details

  • LilyPad - Designed for wearable application, this board can be sewn onto fabric, and is a stylish purple. details

  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry. details
to:
  • Bluetooth - Versión que incluye un módulo bluetooh que permite la comunicación wireless y programación de la plca. Es compatible con las shields de Arduino. detalles

  • LilyPad - Versión diseñada para aplicaciones en ropa, dicha placa puede ser cosida. detalles

  • Fio - Versión diseñada para aplicaciones wireless. Incluye un socket para incluir una radio XBee, un conector para una bateria LiPo, y un circuito para la carga de la misma. detalles
June 06, 2010, at 04:24 PM by Equipo Traduccion -
Changed lines 2-6 from:

There are multiple versions of the Arduino board. The current basic board, the Duemilanove, uses the Atmel ATmega328 (datasheet). The older Diecimila, and the first run of Duemilanoves used the Atmel ATmega168 (datasheet), while older boards use the ATmega8 (datasheet). The Arduino Mega is based on the ATmega1280 (datasheet).

Note: The reference designs for arduino are distributed under a Creative Commons license Attribution-ShareAlike 2.5. See So you want to make an Arduino? for more information and guidelines on producing your own hardware.

to:

Existen multitud versiones de la placa Arduino. La versión básica actual, "Duemilanove",usa un microcontrolador Atmel ATMega 328.(datasheet). La versión anterior,"Diecimila", y la primera versión, "Duemilanoves", usaban el microcontrolador Atmel ATmega168 (datasheet), mientras que las primeras versiones de la placa, usaban ATmega8 (datasheet). La version "Mega" utiliza un ATmega1280(datasheet).

Nota: Los diseños estan bajo licencia Creative Commons license Attribution-ShareAlike 2.5. Visita Quieres hacer un Arduino? para más información y guias de cómo producir tu propio hardware.

Changed lines 8-15 from:
  • Duemilanove - This is the latest revision of the basic Arduino USB board. It connects to the computer with a standard USB cable and contains everything else you need to program and use the board. It can be extended with a variety of shields: custom daughter-boards with specific features. details

  • Diecimila - This is the previous revision of the basic Arduino USB board. details

  • Nano - A compact board designed for breadboard use, the Nano connects to the computer using a USB Mini-B cable. details

  • Mega - A larger, more powerful Arduino board, shield compatible with the Duemilanove and Diecmila. details
to:
  • Duemilanove - Última versión de la placa básica Arduino USB. Se conecta al ordenador mediante un cable estardar USB y contiene todo lo necesario para programar y usar la placa. Puedes ampliar con variedad de "shields": placas a medida para ampliar requisitos específicos hardware. detalles

  • Diecimila - Versión anterior de la placa básica Arduino USB.detalles

  • Nano - Versión compacta diseñada para uso en protoboards.Nano se conecta al ordenador usando un cable USB Mini-B. detalles

  • Mega - Versión más potente y grande, compatible con shields de Duemilanove y Diecimila. detalles
March 31, 2010, at 06:14 PM by David A. Mellis - moving the Arduino Fio programming link to getting started guide for consistency with other boards
Changed lines 21-26 from:
to:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry. details
March 30, 2010, at 05:59 AM by Tom Igoe -
Changed lines 21-22 from:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry.\\
to:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry.
March 30, 2010, at 05:59 AM by Tom Igoe -
Changed line 22 from:
 ** details
to:
March 30, 2010, at 05:59 AM by Tom Igoe -
Changed lines 21-22 from:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry. ** details
to:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry.
    ** details
March 30, 2010, at 05:58 AM by Tom Igoe -
Changed lines 23-24 from:
  • [[ArduinoBoardFioTips| Fio Sketch-writing Tips
to:
March 30, 2010, at 05:58 AM by Tom Igoe -
Changed lines 23-24 from:
  • [[ArduinoBoardFioTips| Fio Sketch-writing Tips
to:
  • [[ArduinoBoardFioTips| Fio Sketch-writing Tips
March 30, 2010, at 05:57 AM by Tom Igoe -
Changed lines 21-22 from:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry. details
to:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry. ** details
March 20, 2010, at 03:28 AM by David A. Mellis -
Added lines 21-22:
  • Fio - Designed for wireless applications. It includes a socket for an XBee radio, a connector for a LiPo battery, and integrated battery charging circuitry. details
December 29, 2009, at 05:44 PM by David A. Mellis -
Deleted lines 49-50:
  • Modern Device Company's Bare-Bones Board (BBB) and Real Bare-Bones Board (RBBB) for use in bread-boards with the FTDI USB-to-TTL-Serial cable. Available as bare PCBs, in kits, or pre-assembled.
July 14, 2009, at 11:22 PM by David A. Mellis -
Changed lines 3-4 from:

There are multiple versions of the Arduino board. The current basic board, the Duemilanove, uses the Atmel ATmega328 (datasheet). The older Diecimila, and the first run of Duemilanoves used the Atmel ATmega168 (datasheet), while older boards use the ATmega8 (datasheet). The Arduino Mega is based on the ATmega1280 (datasheet).

to:

There are multiple versions of the Arduino board. The current basic board, the Duemilanove, uses the Atmel ATmega328 (datasheet). The older Diecimila, and the first run of Duemilanoves used the Atmel ATmega168 (datasheet), while older boards use the ATmega8 (datasheet). The Arduino Mega is based on the ATmega1280 (datasheet).

June 16, 2009, at 08:11 PM by Tom Igoe -
Changed lines 3-4 from:

There are multiple versions of the Arduino board. Most use the Atmel ATmega168 (datasheet), while older boards use the ATmega8 (datasheet).

to:

There are multiple versions of the Arduino board. The current basic board, the Duemilanove, uses the Atmel ATmega328 (datasheet). The older Diecimila, and the first run of Duemilanoves used the Atmel ATmega168 (datasheet), while older boards use the ATmega8 (datasheet). The Arduino Mega is based on the ATmega1280 (datasheet).

March 26, 2009, at 10:40 AM by David A. Mellis - adding Mega
Added lines 15-16:
  • Mega - A larger, more powerful Arduino board, shield compatible with the Duemilanove and Diecmila. details
November 01, 2008, at 05:27 PM by David A. Mellis -
Changed lines 40-41 from:
  • Motor Shield - This shield allow an Arduino board to control DC motors and read encoders. details
to:
  • Motor Shield - This shield allows an Arduino board to control DC motors and read encoders. details

  • Ethernet Shield - This shield allows an Arduino board to connect to the internet. details
October 19, 2008, at 03:15 PM by David A. Mellis -
Changed lines 9-10 from:
  • Diecimila - This is the most popular Arduino board. It connects to the computer with a standard USB cable and contains everything else you need to program and use the board. It can be extended with a variety of shields: custom daughter-boards with specific features. details
to:
  • Duemilanove - This is the latest revision of the basic Arduino USB board. It connects to the computer with a standard USB cable and contains everything else you need to program and use the board. It can be extended with a variety of shields: custom daughter-boards with specific features. details

  • Diecimila - This is the previous revision of the basic Arduino USB board. details
September 04, 2008, at 10:40 AM by David A. Mellis -
Added lines 36-39:
  • Xbee Shield - This shield allows multiple Arduino boards to communicate wirelessly over distances up to 100 feet (indoors) or 300 feet (outdoors) using the Maxstream Xbee Zigbee module. details

  • Motor Shield - This shield allow an Arduino board to control DC motors and read encoders. details
Added line 51:
August 23, 2008, at 01:34 AM by David A. Mellis -
Added lines 23-24:
  • Pro Mini - Like the Pro, the Pro Mini is designed for advanced users requiring a low-cost, small board and willing to do some extra work. details
August 23, 2008, at 01:14 AM by David A. Mellis -
Changed lines 21-22 from:
  • Arduino Pro - This board is designed for advanced users who want to leave a board embedded in a project: it's cheaper than a Diecimila and easily powered by a battery, but requires additional components and assembly. details
to:
  • Pro - This board is designed for advanced users who want to leave a board embedded in a project: it's cheaper than a Diecimila and easily powered by a battery, but requires additional components and assembly. details
August 23, 2008, at 01:14 AM by David A. Mellis -
Added lines 21-22:
  • Arduino Pro - This board is designed for advanced users who want to leave a board embedded in a project: it's cheaper than a Diecimila and easily powered by a battery, but requires additional components and assembly. details
July 18, 2008, at 11:08 PM by David A. Mellis -
Changed lines 9-12 from:
  • Diecimila - The latest version of the USB boards. Allows for automatic reset of the board by the Arduino software when uploading. Contains a low dropout power supply (which accepts 6-12V), and has overcurrent protection for the USB connection. details

  • Bluetooth - This version eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. details
to:
  • Diecimila - This is the most popular Arduino board. It connects to the computer with a standard USB cable and contains everything else you need to program and use the board. It can be extended with a variety of shields: custom daughter-boards with specific features. details

  • Nano - A compact board designed for breadboard use, the Nano connects to the computer using a USB Mini-B cable. details

  • Bluetooth - The Arduino BT contains a bluetooth module that allows for wireless communication and programming. It is compatible with Arduino shields. details
Changed lines 17-22 from:
  • Nano - A compact board designed for breadboard use, contains integrated USB and a Mini-B USB jack. details

  • Mini - This is a miniature Arduino board that works well in a breadboard or for applications in which space is at a premium.details

  • Mini USB Adapter - This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. details
to:
  • Mini - This is the smallest Arduino board. It works well in a breadboard or for applications in which space is at a premium. It connects to the computer using the Mini USB Adapter. details

  • Mini USB Adapter - This board converts a USB connection into 5 volt, GND, TX and RX lines that you can connect to the Arduino Mini or other microcontroller. details
Changed lines 23-24 from:
  • Serial Single Sided - This board is slightly larger than the serial board (but pin compatible) and designed to be etched by hand. details
to:
  • Serial Single Sided - This board is designed to be etched and assembled by hand. It is slightly larger than the Diecimila, but still shield compatible. details
May 15, 2008, at 03:19 AM by David A. Mellis -
Added lines 11-16:
  • Bluetooth - This version eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. details

  • LilyPad - Designed for wearable application, this board can be sewn onto fabric, and is a stylish purple. details

  • Nano - A compact board designed for breadboard use, contains integrated USB and a Mini-B USB jack. details
Deleted lines 20-23:
  • LilyPad - Designed for wearable application, this board can be sewn onto fabric, and is a stylish purple. details

  • Bluetooth - This is the latest version that eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. details
March 17, 2008, at 11:44 PM by David A. Mellis -
Added lines 34-35:
  • Modern Device Company's Bare-Bones Board (BBB) and Real Bare-Bones Board (RBBB) for use in bread-boards with the FTDI USB-to-TTL-Serial cable. Available as bare PCBs, in kits, or pre-assembled.
March 17, 2008, at 03:38 AM by David A. Mellis -
Deleted lines 33-34:
  • Modern Device Company's Bare-Bones Board (BBB) and Real Bare-Bones Board (RBBB) for use in bread-boards with the FTDI USB-to-TTL-Serial cable. Available as bare PCBs, in kits, or pre-assembled.
March 05, 2008, at 04:40 PM by David A. Mellis -
Changed lines 21-22 from:
  • Serial Single Sided - This board is a bigger version of the Serial one meant for those that don't have easy access to buy a premade board. Then it is possible to assemble the board out of a cupper plate and some acid. details (including Schematics and CAD Files)
to:
  • Serial Single Sided - This board is slightly larger than the serial board (but pin compatible) and designed to be etched by hand. details
January 26, 2008, at 12:45 AM by David A. Mellis - moving older hardware to the board index.
Changed lines 23-30 from:

Older Hardware

  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic. Note: on the Arduino NG Rev. C, the LED on pin 13 is not mounted.

  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View Note: revised 20070614 to be USB v2.1

Hardware Index

to:

Looking for an older board?

January 26, 2008, at 12:33 AM by David A. Mellis - the pin mapping can just be in the hacking section too. i think. :)
Deleted lines 32-36:

Pin Mapping

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.
The corresponding chart for the Atmega168.

January 26, 2008, at 12:31 AM by David A. Mellis - parallel port programmer can just be in the hacking section.
Deleted lines 40-43:

Parallel Port Programmer

A parallel port programmer is a quick-and-dirty tool for burning a bootloader onto new Arduino boards.

January 26, 2008, at 12:31 AM by David A. Mellis - Moving standalone instructions to the hacking section.
Deleted lines 22-23:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts. Serial: instructions, Partlist. USB instructions and partlist (from the ITP physcomp pages).
January 26, 2008, at 12:28 AM by David A. Mellis -
Deleted lines 10-13:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise. details (including Schematics and CAD Files)

  • Serial Single Sided - This board is a bigger version of the Serial one meant for those that don't have easy access to buy a premade board. Then it is possible to assemble the board out of a cupper plate and some acid. details (including Schematics and CAD Files)
Added lines 19-22:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise. details (including Schematics and CAD Files)

  • Serial Single Sided - This board is a bigger version of the Serial one meant for those that don't have easy access to buy a premade board. Then it is possible to assemble the board out of a cupper plate and some acid. details (including Schematics and CAD Files)
January 26, 2008, at 12:28 AM by David A. Mellis - trying to clean up the page a bit.
Deleted lines 10-13:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic. Note: on the Arduino NG Rev. C, the LED on pin 13 is not mounted.

  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View Note: revised 20070614 to be USB v2.1
Deleted lines 20-21:
  • Prototyping - This board has a section with prototyping holes (as in perf board) so you can easily and stably attach a few extra parts. To make room, however, it has neither a serial nor USB plug, so you'll need to program it with an AVR-ISP or parallel programmer. details
Added lines 25-30:

Older Hardware

  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic. Note: on the Arduino NG Rev. C, the LED on pin 13 is not mounted.

  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View Note: revised 20070614 to be USB v2.1
November 19, 2007, at 04:38 PM by David A. Mellis - adding links to bare-bones board and boarduino
Changed lines 47-49 from:

Related Hardware

See the community-maintained list of related hardware on the playground.

to:

Recommended Third-Party Hardware

Products from others that we've tried and liked; compatible with the Arduino software.

  • Modern Device Company's Bare-Bones Board (BBB) and Real Bare-Bones Board (RBBB) for use in bread-boards with the FTDI USB-to-TTL-Serial cable. Available as bare PCBs, in kits, or pre-assembled.

  • Boarduino from Adafruit Industries. For use in bread-boards with FTDI USB-to-TTL-Serial cable or other USB-to-serial adapter. Available as a bare PCB or in kit form.

Other Related Hardware

Also check out the community-maintained list of related hardware on the playground.

October 22, 2007, at 08:59 PM by David A. Mellis -
Changed lines 5-6 from:

Note: The reference designs for arduino are distributed under a Creative Commons license Attribution-ShareAlike 2.5

to:

Note: The reference designs for arduino are distributed under a Creative Commons license Attribution-ShareAlike 2.5. See So you want to make an Arduino? for more information and guidelines on producing your own hardware.

October 04, 2007, at 04:15 PM by David A. Mellis - adding lilypad
Added lines 23-24:
  • LilyPad - Designed for wearable application, this board can be sewn onto fabric, and is a stylish purple. details
September 20, 2007, at 02:55 AM by David A. Mellis -
Changed lines 45-46 from:

Related Hardware

to:

Related Hardware

September 20, 2007, at 02:30 AM by David A. Mellis - adding link to playground page of related boards
Added lines 44-47:

Related Hardware

See the community-maintained list of related hardware on the playground.

August 07, 2007, at 05:42 PM by David A. Mellis -
Added lines 29-32:

Hardware Index

The hardware index lists all the Arduino boards made and the differences between them.

August 07, 2007, at 05:26 PM by David A. Mellis - adding diecimila
Added lines 9-10:
  • Diecimila - The latest version of the USB boards. Allows for automatic reset of the board by the Arduino software when uploading. Contains a low dropout power supply (which accepts 6-12V), and has overcurrent protection for the USB connection. details
June 16, 2007, at 12:42 AM by David A. Mellis -
Changed lines 3-4 from:

There are multiple versions of the Arduino board. Most use the Atmel ATmega8 (datasheet) and some use the ATmega168 (datasheet).

to:

There are multiple versions of the Arduino board. Most use the Atmel ATmega168 (datasheet), while older boards use the ATmega8 (datasheet).

June 16, 2007, at 12:41 AM by David A. Mellis - removing troubleshooting link
Deleted lines 37-46:

Troubleshooting

A link to Arduino hardware troubleshooting in the Guide section.

June 16, 2007, at 12:40 AM by David A. Mellis -
Changed lines 17-18 from:
  • Mini - This is a miniature Arduino board with a tiny processor that has twice the memory of the one on normal Arduino boards. Can only be powered with up to 9 volts; don't give it any more voltage or plug it in backwards - it'll die.details
to:
  • Mini - This is a miniature Arduino board that works well in a breadboard or for applications in which space is at a premium.details
June 13, 2007, at 11:22 PM by David Cuartielles -
Changed lines 11-12 from:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
to:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View Note: revised 20070614 to be USB v2.1
June 13, 2007, at 11:21 PM by David Cuartielles -
Changed lines 11-12 from:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
to:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
June 13, 2007, at 11:17 PM by David Cuartielles -
Changed lines 11-12 from:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
to:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
May 03, 2007, at 02:22 AM by Paul Badger -
Changed lines 30-31 from:

The corresponding chart for the Atmega168

to:

The corresponding chart for the Atmega168.

May 03, 2007, at 02:21 AM by Paul Badger -
Changed line 29 from:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.\

to:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.\\

May 03, 2007, at 02:21 AM by Paul Badger -
Changed line 29 from:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.\\\

to:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.\

May 03, 2007, at 02:20 AM by Paul Badger -
Changed line 29 from:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.

to:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.\\\

May 03, 2007, at 02:20 AM by Paul Badger -
Deleted line 29:
May 03, 2007, at 02:19 AM by Paul Badger -
Added lines 31-32:

The corresponding chart for the Atmega168

May 03, 2007, at 02:17 AM by Paul Badger -
Changed lines 40-46 from:

A link to Arduino hardware troubleshooting in the Guide section

to:

A link to Arduino hardware troubleshooting in the Guide section.

May 03, 2007, at 02:16 AM by Paul Badger -
Changed lines 38-40 from:

to:

Troubleshooting

A link to Arduino hardware troubleshooting in the Guide section

March 03, 2007, at 09:42 PM by David A. Mellis -
Changed lines 9-10 from:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic. Note: on the Arduino NG Rev. C, the LED is not mounted.
to:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic. Note: on the Arduino NG Rev. C, the LED on pin 13 is not mounted.
March 03, 2007, at 09:42 PM by David A. Mellis -
Changed lines 9-10 from:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic
to:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic. Note: on the Arduino NG Rev. C, the LED is not mounted.
January 27, 2007, at 02:07 PM by David A. Mellis - adding link to bluetooth board.
Changed lines 23-24 from:
  • Bluetooth - This is the latest version that eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. (The design for this board will be downloadable after we debug it :)
to:
  • Bluetooth - This is the latest version that eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. details
December 21, 2006, at 06:55 PM by David A. Mellis -
Changed lines 29-30 from:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.

to:

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.

Changed lines 36-40 from:

A parallel port programmer is a quick-and-dirty tool for burning a bootloader onto new Arduino boards.

to:

A parallel port programmer is a quick-and-dirty tool for burning a bootloader onto new Arduino boards.

November 21, 2006, at 03:46 PM by Massimo Banzi -
November 21, 2006, at 03:45 PM by Massimo Banzi -
Changed lines 5-6 from:

Note: The reference designs for arduino are distributed under a Creative Commons license Attribution-NonCommercial-ShareAlike 2.5

to:

Note: The reference designs for arduino are distributed under a Creative Commons license Attribution-ShareAlike 2.5

November 21, 2006, at 03:44 PM by Massimo Banzi -
Changed lines 9-11 from:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).
to:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).Schematic
November 21, 2006, at 03:42 PM by Massimo Banzi -
Added lines 9-11:
  • NG - Further evolution of the USB boards with the new FTDI232R usb interface and some layout improvements (plus some hidden features).
November 20, 2006, at 10:58 AM by David A. Mellis -
Deleted lines 4-5:

For information on getting a board working see the Arduino Howto and the assembly guide.

November 16, 2006, at 08:33 PM by David A. Mellis -
Changed lines 3-4 from:

There are three versions of the Arduino board. All use the Atmel ATmega8 (datasheet).

to:

There are multiple versions of the Arduino board. Most use the Atmel ATmega8 (datasheet) and some use the ATmega168 (datasheet).

Deleted line 6:
October 02, 2006, at 11:54 PM by Massimo Banzi -
Added lines 7-9:

Note: The reference designs for arduino are distributed under a Creative Commons license Attribution-NonCommercial-ShareAlike 2.5

September 05, 2006, at 07:26 PM by David A. Mellis -
Changed lines 17-18 from:
  • Mini USB Adapter - This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.
to:
  • Mini USB Adapter - This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer. details
September 05, 2006, at 07:24 PM by David A. Mellis -
Added lines 17-18:
  • Mini USB Adapter - This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Mini or other microcontrollers, allowing them to talk to the computer.
August 31, 2006, at 06:41 PM by David A. Mellis - adding arduino mini (stamp)
August 31, 2006, at 06:29 PM by David A. Mellis - adding arduino mini (stamp)
Added lines 9-10:
  • USB - It's an evolution of the serial board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
Changed lines 15-16 from:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
to:
  • Mini - This is a miniature Arduino board with a tiny processor that has twice the memory of the one on normal Arduino boards. Can only be powered with up to 9 volts; don't give it any more voltage or plug it in backwards - it'll die.details
August 29, 2006, at 12:51 AM by David A. Mellis -
Changed lines 19-20 from:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts. Serial: instructions, Partlist. USB instructions and partlist
to:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts. Serial: instructions, Partlist. USB instructions and partlist (from the ITP physcomp pages).
August 29, 2006, at 12:51 AM by David A. Mellis -
Changed lines 19-20 from:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts. Serial: instructions, Partlist. USB instructions and partlist
to:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts. Serial: instructions, Partlist. USB instructions and partlist
August 29, 2006, at 12:50 AM by David A. Mellis -
Changed lines 19-20 from:
to:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts. Serial: instructions, Partlist. USB instructions and partlist
March 25, 2006, at 05:27 PM by David A. Mellis -
Changed lines 21-22 from:

Pin Mapping

to:

Pin Mapping

March 25, 2006, at 05:27 PM by David A. Mellis -
Changed lines 3-4 from:

There are three versions of the Arduino board. All use the Atmel ATmega8 (datasheet); see this diagram for the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.

to:

There are three versions of the Arduino board. All use the Atmel ATmega8 (datasheet).

Added lines 21-24:

Pin Mapping

This diagram shows the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.

March 21, 2006, at 01:02 AM by David A. Mellis - Added link to diagram of atemga8 <-> arduino pins numbers
Changed lines 3-4 from:

There are three versions of the Arduino board. All use the Atmel Atmega8 (datasheet). For information on getting a board working see the Arduino Howto and the assembly guide.

to:

There are three versions of the Arduino board. All use the Atmel ATmega8 (datasheet); see this diagram for the correspondence between the legs of the ATmega8 and the pin labels used on the Arduino board.

For information on getting a board working see the Arduino Howto and the assembly guide.

February 26, 2006, at 02:57 PM by 82.186.237.10 -
Added lines 13-14:
  • Prototyping - This board has a section with prototyping holes (as in perf board) so you can easily and stably attach a few extra parts. To make room, however, it has neither a serial nor USB plug, so you'll need to program it with an AVR-ISP or parallel programmer. details
January 22, 2006, at 02:11 PM by 82.186.237.10 -
Changed lines 7-10 from:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise. Schematics and CAD Files

  • Serial Single Sided - This board is a bigger version of the Serial one meant for those that don't have easy access to buy a premade board. Then it is possible to assemble the board out of a cupper plate and some acid. Schematics and CAD Files
to:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise. details (including Schematics and CAD Files)

  • Serial Single Sided - This board is a bigger version of the Serial one meant for those that don't have easy access to buy a premade board. Then it is possible to assemble the board out of a cupper plate and some acid. details (including Schematics and CAD Files)
Changed lines 15-16 from:
to:
November 14, 2005, at 06:49 PM by 216.165.112.82 -
Changed lines 11-12 from:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Pic
to:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Quick View
November 14, 2005, at 06:48 PM by 216.165.112.82 -
Changed lines 11-12 from:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions
to:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions / Pic
November 09, 2005, at 03:05 PM by 128.122.151.128 -
Changed lines 11-12 from:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic
to:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic / Assembly Instructions
November 08, 2005, at 10:42 PM by 128.122.151.128 -
Changed lines 11-12 from:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic /Instructions
to:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic
November 08, 2005, at 10:41 PM by 128.122.151.128 -
Changed lines 11-12 from:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic
to:
  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic /Instructions
October 21, 2005, at 01:36 PM by 213.140.6.96 -
Changed lines 15-16 from:
to:
October 21, 2005, at 01:36 PM by 213.140.6.96 -
Changed lines 15-16 from:
to:
October 17, 2005, at 08:22 PM by 195.178.229.25 -
Added lines 9-10:
  • Serial Single Sided - This board is a bigger version of the Serial one meant for those that don't have easy access to buy a premade board. Then it is possible to assemble the board out of a cupper plate and some acid. Schematics and CAD Files
October 02, 2005, at 01:10 PM by 81.114.121.230 -
Changed lines 7-9 from:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise.

Schematics and CAD Files

to:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise. Schematics and CAD Files
October 02, 2005, at 01:10 PM by 81.114.121.230 -
Changed lines 8-13 from:

Version 1

 Download Eagle Cad files / schematic / part list

Version 2

 Download Eagle Cad files / schematic / part list
to:
October 02, 2005, at 01:08 PM by 81.114.121.230 -
Changed lines 7-8 from:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise and should cost less than 20 EUR. Download Eagle Cad files / schematic / part list
to:
  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise.

Version 1

 Download Eagle Cad files / schematic / part list

Version 2

 Download Eagle Cad files / schematic / part list
September 19, 2005, at 12:04 AM by 66.167.184.70 -
Changed lines 13-14 from:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts.
to:
September 09, 2005, at 02:28 AM by 81.75.243.242 -
Changed lines 3-4 from:

There are three versions of the Arduino board. All use the Atmel Atmega8 (datasheet).

to:

There are three versions of the Arduino board. All use the Atmel Atmega8 (datasheet). For information on getting a board working see the Arduino Howto and the assembly guide.

August 26, 2005, at 05:28 AM by 67.175.184.42 -
Changed lines 18-21 from:

to:

Parallel Port Programmer

A quick-and-dirty tool for burning a bootloader onto new Arduino boards.

July 22, 2005, at 04:35 PM by 195.74.143.237 -
Added lines 5-6:

I/O Boards

Added lines 12-21:
  • Standalone - You can use the Atmega8 chip by itself in a breadboard or a prototyping board using just a few extra parts.

Shields

Shields are boards to be mounted on top of the Arduino board and that extend the functionality of Arduino to control different devices, acquire data, etc.

July 22, 2005, at 04:31 PM by 195.74.143.237 -
Added lines 1-9:

Hardware

There are three versions of the Arduino board. All use the Atmel Atmega8 (datasheet).

  • Serial - It's a basic board that uses RS232 as an interface to a computer for programming or communication. This board is easy to assemble even as a learning exercise and should cost less than 20 EUR. Download Eagle Cad files / schematic / part list

  • USB - It's an evolution of the previous board that has a USB port to communicate with a computer. It's more difficult to assemble because of the SMD chip. Download Eagle Cad files / schematic

  • Bluetooth - This is the latest version that eliminates the need for cables going to the microcontroller board. It can be programmed and communicate up to 10 metres away from a computer. It can also be used from a mobile phone. (The design for this board will be downloadable after we debug it :)

Share