Main.USBAssembly3 History

Hide minor edits - Show changes to markup

June 01, 2010, at 01:44 PM by Equipo Traduccion -
Changed lines 1-6 from:

Now add the rest of the small capacitors and resistors, as follows:

  • R1, 10Kohms (brown-black-orange-gold)
  • R7, 1Kohm (brown-black-red-gold)
  • R9, 1Kohm (brown-black-red-gold)
  • R10, 1Kohm (brown-black-red-gold)
to:

Ahora añade el resto de los condensadores pequeños y resistencias como sigue:

  • R1, 10Kohms (marrón-negro-naranja-oro)
  • R7, 1Kohm (marrón-negro-rojo-oro)
  • R9, 1Kohm (marrón-negro-rojo-oro)
  • R10, 1Kohm (marrón-negro-rojo-oro)
Changed lines 12-13 from:

Now your board will look like this:

to:

Ahora tu placa se verá así:

Changed lines 16-17 from:

Next, acc the big capacitors, the diode, the reset switch, and the microcontroller crystal, as follows:

to:

A continuación, suelda los condensadores grandes, los diodos, el botón de reset, y el cristal oscilador, como sigue:

Changed lines 21-25 from:
  • S1, switch
  • Q1, 16MHz crystal

Make sure the diode is facing the correct direction. The silver band on the diode should face the top of the board, as in the photo below:

to:
  • S1, botón
  • Q1, cristal de 16MHz

Asegúrate de que el diodo está mirando en la dirección correcta. La banda plateada del diodo debería estar mirando hacía la parte superior de la placa, como en la foto siguiente:

Changed line 28 from:
to:
November 09, 2005, at 03:08 PM by 128.122.151.128 -
Changed lines 24-25 from:

Make sure the diode is facing the correct direction. The silver band on the diode should face the tp of the board, as in the photo below:

to:

Make sure the diode is facing the correct direction. The silver band on the diode should face the top of the board, as in the photo below:

November 09, 2005, at 02:56 PM by 128.122.151.128 -
Added line 28:
November 09, 2005, at 02:55 PM by 128.122.151.128 -
Changed lines 3-6 from:
  • R1, 10Kohms
  • R7, 1Kohm
  • R9, 1Kohm
  • R10, 1Kohm
to:
  • R1, 10Kohms (brown-black-orange-gold)
  • R7, 1Kohm (brown-black-red-gold)
  • R9, 1Kohm (brown-black-red-gold)
  • R10, 1Kohm (brown-black-red-gold)
Added lines 16-25:

Next, acc the big capacitors, the diode, the reset switch, and the microcontroller crystal, as follows:

  • C6, 100uF
  • C7, 100uF
  • D1, 1N4004
  • S1, switch
  • Q1, 16MHz crystal

Make sure the diode is facing the correct direction. The silver band on the diode should face the tp of the board, as in the photo below:

Deleted lines 27-31:

November 09, 2005, at 02:49 PM by 128.122.151.128 -
Changed lines 1-13 from:
to:

Now add the rest of the small capacitors and resistors, as follows:

  • R1, 10Kohms
  • R7, 1Kohm
  • R9, 1Kohm
  • R10, 1Kohm
  • C1, 100nF (0.1uF)
  • C2, 22pF
  • C3, 22pF
  • C5, 100nF (0.1uF)

Now your board will look like this:

November 09, 2005, at 02:45 PM by 128.122.151.128 -
Added lines 1-10:

Share