Hello, I recently bought a usb ttl adapter which uses the cp2102 chip. I had some problems with autoreset when uploading a Sketch, and I found no clear description on how to get it working. To help other people, I wrote a small blog post which describes how to get autoreset working: http://blog.ta…

How to use a CP2102 USB TTL Cable with Arduino

system April 16, 2012, 1:03pm 7

Have a look here if you want to have a butchers at my topic too:

Topic		Replies	Views
TTL UART CP2102 Converter [SOLVED] Microcontrollers	17	49830	May 6, 2021
A USB cable with auto-reset for less than 4 $ IDE 1.x	14	14864	May 5, 2021
Arduino breadboard with CP2102 module Troubleshooting	3	2198	May 6, 2021
serial adapter board, auto reset hack q Development	3	1597	May 6, 2021
CP2102 : type of cap between dtr and RESET Microcontrollers	15	5930	May 6, 2021